question for Pioneer/PREMIER HU owners

[Rookie_80 10+ year member]

Where do u set your SW-2, LOUD & SLA ?

Mine is at: +2, OFF, +2

Click to read more...

 

[rc10mike 10+ year member]

SW-2 as in low pass setting? Usually 80hz

Loud: Off

SLA: Never needed to mess with it.

 

[dman4486 5,000+ posts]

SW-2 as in low pass setting? Usually 80hzLoud: Off

SLA: Never needed to mess with it.

x2

and sw2 is the level....mine is between -4 and +2 with gains set at +2

 

[Rookie_80 10+ year member]

SW-2 as in low pass setting? Usually 80hzLoud: Off

SLA: Never needed to mess with it.

No, SW-2: subwoofer level2

low pass setting is abbriviated: LPF

 

[Rookie_80 10+ year member]

Some ppl use LOUD and claim it works well without any distortion. //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

 

[rc10mike 10+ year member]

Yeah I turn it on sometimes. I doesnt distort with my setup, but it sounds TOO loud!

 

[dman4486 5,000+ posts]

Some ppl use LOUD and claim it works well without any distortion. //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

because they don't know how to setup a stereo...loud is designed to boost highs and lows when at low volume and is not recommended for higher volume applications

 

[Rookie_80 10+ year member]

loud is designed to boost highs and lows when at low volume and is not recommended for higher volume applications

and can damage ___________ ?

a)stereo

b)speakers

c)amp

lol

 

[dman4486 5,000+ posts]

and can damage ___________ ?a)stereo

b)speakers

c)amp

lol

COULD damage anything if used excessively...when I turn mine on I get tons of distortion, and overall sounds like shit

 

[Rookie_80 10+ year member]

COULD damage anything if used excessively...when I turn mine on I get tons of distortion, and overall sounds like shit

Same here.

 

[Rookie_80 10+ year member]

ok how bout boosting Sub level 2 to the max (+6) ?

 

[dman4486 5,000+ posts]

ok how bout boosting Sub level 2 to the max (+6) ?

depends on how you have the gain set on your amp....if it would push the amp into clipping then bad and don't do it

 

[jco1385 5,000+ posts]

mine has lo, mid, hi.

lo is 0

mid is +4

high is + 6

sla +2

loud OFF

 

[Rookie_80 10+ year member]

mine has lo, mid, hi.
lo is 0

mid is +4

high is + 6

sla +2

loud OFF

No sub levele for you? And i don mean "lows".

I mean SW-1, SW-2 levels. Where u can regulate subwoofer level only or turn/block it off completely.

 

[Rookie_80 10+ year member]

depends on how you have the gain set on your amp....if it would push the amp into clipping then bad and don't do it

whats the max level u used? +4?