project LOUD corolla * 2 sd2.5 15's aq 2200* :D

[Notloud00 10+ year member]

more pictures //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif got it playin no vid tho //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif will have one soon. its LOUD for what it is. prolly around a 145 at the headrest right now and when it gets sealed and he gets his electrical up (he has one economy batt and stock alt) itll be around a 147 or so hopefully

 

[DonH 5,000+ posts]

ok man. nice idea with the angled ports but how exactly are you going to fill those holes???

 

[FloridaStanza 10+ year member]

Hot glue im assuming (last pic)

 

[tez4life Premium Member]

Came out better than I expected, and yea, got screws? Lol.

How well are those Sona tubes working as ports? Any noise?

 

[Notloud00 10+ year member]

around the ports? they are already filled wit hot glue, the holes for the wires are too i just didnt get a pic of um finished. it will be great stuffed and beauty panels will be made for the top and front. itll be really nice when its done he is a perfectionist lol

 

[twisztdauthorit 10+ year member]

those ports are turning me on //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

The holes can be easily filled with resin

 

[72 chevy van 10+ year member]

wow looks great love the port's.

 

[Notloud00 10+ year member]

NO noise. below 35hz could be improved but i needs to be sealed off before we retune the ports. its alot louder than i thought it would be since its open to the trunk still, i was like //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

here are sum pics of the bracing and ish too we did. the front has a double baffle and we added a brace in the middle of the ports. also this setup has a TON to gain in it //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[MonkeyBone 10+ year member]

What a great idea for the ports, and it turned out great. Those look bad ***. Can't wait to see the finished product!

 

[WOT]

Sonotubes are weka, and dont work without reinforcement

I used the exact 8" tubes only 16" long, with the exact same subs, and they flex/vibrate like crazy. I personally scrapped the idea and just went slot port, but you may want to put 2 layers of glass around them

 

[Xprime4 10+ year member]

I finished my box yesturday. Sorry no pics for now, i need to find my camera. The subs are loud, pretty impressive.

 

[Notloud00 10+ year member]

Sonotubes are weka, and dont work without reinforcement
I used the exact 8" tubes only 16" long, with the exact same subs, and they flex/vibrate like crazy. I personally scrapped the idea and just went slot port, but you may want to put 2 layers of glass around them

doesnt seem like a prob to me //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif should be great stuffed sum tomer i should have sum WAY better pics too

 

[TnT_Sounds 10+ year member]

I sure hope you have something in the near future for making that rear deck you cut in half one solid piece again... Beings you have structs or coil over struts in back that rear deck actually acts as a body shock tower brace... You could take a bump wrong, hit a pot hole or do aything to stress or articulate your rear suspensions and you'll stress the hell out of that rear deck. You'll notcie terrible ride, and possible stress cracks going almost towards your rear window. Worst case scenarios is your whoe rear deck and rear suspension could cave inwards.

 

[TnT_Sounds 10+ year member]

this is my friends old system I did

I made a cross member out of square tubing and agnle iron to make it one solid piece again.

 

[Notloud00 10+ year member]

vids!!!!! camera sorta sux :/

http://s90.photobucket.com/albums/k240/icweinerpb/?action=view&current=DSCN0846.flv

http://s90.photobucket.com/albums/k240/icweinerpb/?action=view&current=DSCN0847.flv