project daily bang.. 2 10" dd 3510 off 2 saz-1500

snoopysnooper
10+ year member

german engineering= fail
well as of now, my 1 3510 should be here any sexond..

i have both sundowns.. i built an amp rack, and for now untill i can afford my 2nd 3510 im puttin this on in a 2.0 cubic foot t-line box tuned to 32 hz at 1 ohm off 1 saz-1500..

once i can afford my 2nd woofer, thye are going into a 4.3 (after diplacemnt) box tuned to 35-40 hz..

im gonna strap the 1500's on em..

they are going into my dodge neon..

this is what i have in my neon right now..

its 1 10" tc oem off my 1500 at 2 ohms..

heres the vid:



the flex is alost better in person..

im going to put the dd in basicly the same box only a little bigger..

im ordering my 2nd one in may..

here is my parts list of what i have done to my neon already:

120 sq feet of edead (2 layers)

iraggi 200 amp alt.

kinetik hc1800 in coustom welded battery tray

2 runs of memphis 4 ga into 1 run of 1/0 ga

morel midbass

crappy alpine deck i got for free

RE 6X9's

hertz tweeters in coustom pods..

what i will be doing in the next month:

2 dd 3510g's (one comming today)

2 sundown saz1500's strapped (have both alreadt)

coutom amp rack..

2 runs of kun 1/0 ga

knu rca's (i have weak directed rca's right now, lol)

new midbass (maybe dd, not sure)

and in liike june or july ill be getting a new duck, maybe pioneer, and doing fiberglass door panels..

ill have lots of pics up later today =]

what do yall think of my system now

and what do yall think about my plans??

any advice?

 
teh pics:

DSCF2781.jpg


DSCF2782.jpg


DSCF2783.jpg


DSCF2784.jpg


DSCF2786.jpg


teh amp rack (used random wood i found and left over carpet from old boxes i hvae built)

DSCF2788.jpg


DSCF2789.jpg


sundown (not in the best cond)

DSCF2790.jpg


DSCF2792.jpg


91.jpg[/img]

 
no comments eh?

well, vids of the dd in a sec, gotta put it in my box =]

**note the box im putting it is is smalllll..

1.25 cubes tuned to 28 hz..

it was for my tc oem..

 
dear god. why put all that awesome equipment in a neon //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif poor...everything. I saw your list and it looks good... so congrats on all that lol!

 
the spineerzzzzz.. hahaha, my friend put them on my car w/o me knowing at his house and i drove home w/o knowing, i got home and felt like a fvck up at life, lol

but yeah, the neon isnt the best.. to be frank really, i hate it..

i want a ford taurus wagon or something like that..

i want an suv, but i dont like the way 10's look in SUV's..

crx is too small of a daily..

the neon has SUCH a small trunk..

it pisses me off..

 
Nice apple juice flex

And fart can //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif Oh and tail lights and snap on spinners and real world powaz!!

jk, not gonna bash you too much but you definately had that comin from the other you tube vidz.

Good luck with the install and make sure you have those amps secured down well.

 
the spineerzzzzz.. hahaha, my friend put them on my car w/o me knowing at his house and i drove home w/o knowing, i got home and felt like a fvck up at life, lol
but yeah, the neon isnt the best.. to be frank really, i hate it..

i want a ford taurus wagon or something like that..

i want an suv, but i dont like the way 10's look in SUV's..

crx is too small of a daily..

the neon has SUCH a small trunk..

it pisses me off..
//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif Your friend bought a set of hubby spinz and put them on your car and then left them at your house? //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 
lol, no he had them in his garage, put them on my car while i was sitting in it on the phone, and i left w/o knowing they were on and noticed when i got home and ripped em off and just never gave em back.. lol..

and yeah, the can is rather large.. not loud though..

i have a flowmaster exaust that looks stock but ROARS!

im about to put that on..

and i think the tail llight dont look bad on that car..

i have seen alot worse on here

*cough* eugene *cough*

its not that much of a ricer, i have a full 2.5" exhaust, no cat, srt-4 mod, and screamin deaomd ignition and i have an iceman intake im about to put on..

the ca is a great daily for a 16 yr old..

and yes, i know i had that sh!t comming, lol..

im out of that bs ghey stage now though..

cant say the same for my little friend..

 
Are you gonna do the big 3? Would be a good idea //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

TBH, that is too many speakers for just a pair of 10" subs. The Skar 6.5s and tweeters are very efficient and can get super loud on moderate...
6
590
I purchased a set of 1" stand off rings, should still be good from door to cone as well. They won't fit without the spacers, the recoils I...
30
8K
I think the easiest path would be an electronic x-over. You will control all the frequencies from one unit, making for a cleaner and simpler...
1
935
Yes. It's one of those fundamental truths I somehow manage to unlearn every time I figure it out. :rolleyes:
6
1K
I ran 2 10’s aero ported in my 06 mustang years ago. Each box was 1.2 and the subs were diamonds (can’t remember exact model). Best thing to do is...
10
1K

About this thread

snoopysnooper

10+ year member
german engineering= fail
Thread starter
snoopysnooper
Joined
Location
Saratoga Springs, NY
Start date
Participants
Who Replied
Replies
23
Views
5,215
Last reply date
Last reply from
yama168
IMG_0925.jpeg

GoldCountryCA

    Apr 26, 2024
  • 0
  • 0
IMG_0924.jpeg

GoldCountryCA

    Apr 26, 2024
  • 0
  • 0

Latest topics

Top