Premier 860MP, Im stumped on how to get it to network mode? internal rca crossovers?

[WOT]

Ive had this Pioneer premier 860mp for a while now, I really dont use much of its tuning features, but I think I have to learn now.

I read that you can set crossover points via the headunit for the rca preouts? I heard it was called networking mode but I CANNOT find that on my deck, Im thinking it may be in the TA1/TA2 part, but it wont let me scroll to ta2 without setting this, or doing that..... I was lost without the maual. Ive only ever used the eq bands and sub/mid crossover points.

Basically I want to learn this method for my new setup. Which consists of

-2 3" tweets that I would like to cross @ 5000, powerred by there own amp

-4 6.5" mids in the doors, also with there own amp

-4 15"s substage, also with its own amp

Now can anyone help me out here, Each amp will have its own set of rcas, as the 860 has 3 preouts, can you adjust crossovers for each?

Im really stumped on how to do this, and have no local help to turn to. Any help will be GREATLY appreciated.

Click to read more...

 

[dave_damage 10+ year member]

first

 

[lincolntc690 10+ year member]

usually a switch on the chassis, pull the unit, look all over, under the cage also

 

[WOT]

What? a switch. How would you set the crossover points? Or you flick the switch and then itll let me get to the options on the deck it isnt leting me now?

hmmmmm

 

[James Bang 5,000+ posts]

first

that was as dumb as the first post.

http://www.pioneerelectronics.com/pio/pe/images/portal/cit_11221/86592493Operation%20Manual%20DEH-P860MP.pdf

 

[WOT]

thanks for posting that, appreciate it, couldnt locate it anywhere

 

[James Bang 5,000+ posts]

http://www.pioneerelectronics.com

^^that place is a good start.

 

[Side Show 10+ year member]

Hahaha

 

[WOT]

Well no shiznit, theres a switch on the side of the headunit to switch it to network mode, NEVER would have thought of that

ANyone have any tips on controlling the netowork mode? Even the manual doesnt give light on what it is capable of, can you adjust each set of rcas crossovers, tips, tricks?

I guess Ill be pulling my headunit in the morning

 

[James Bang 5,000+ posts]

one

two

three

go

 

[WOT]

I read 1 and 2, never knew what active was. 3 I'll read soon, huge thread. I never knew this deck had this feature, I never knew it had that switch...

 

[James Bang 5,000+ posts]

A picture is worth a 1,000 words, but this one basically says two: