Powering CDT ES-07.3 HELP

[igeriys 10+ year member]

I'll be installing my new ES-07.3 set this weekend. From what I know it can take 300 rms per side.

My amp PPI PC4100 100x4, 400x2 bridged.

Is it a good idea to run it passive in the bridged mode(2x400) with the gains set at 3/4th or better to run it active with 4x100 and 2x50 from the deck(Eclipse AV8533) ?

Thanks.

Click to read more...

 

[2000LaDe 10+ year member]

yes run it 2x400 because i have the es-07.2 gold with upstage and u want to put a bare minumum of 200 rms to them. but just make sure u set the gain correctly and you should have no problems. great components. the best i might add.

good luck