Power to amp but no sound

[Yoo_gomez]

Hello I'm new to this but I recently bought a new kenwood amp and a new kenwood head unit. I have all the wires hooked up to the amp and the amp turns on but I get sound from my subs. I have tried new rca cables and hooked my subs to a friends amp and the subs work fine. I don't what else to do. Please help

Click to read more...

 

[dragnix 5,000+ posts]

Hook your friend's amp, or a different amp and see if the same thing happens

 

[Yoo_gomez]

This is my 3rd amp. I had the original Rockford amp but I hit a bad pothole and pulled the ground and power cables out. They touched it stopped working. I bought a new amp checked all fuses. Still nothing. I returned it and got another still nothing. I thought maybe it was because it was some cheap lanzar brand so I got this kenwood one but still nothing!

 

[Boomin_tahoe 5,000+ posts]

I got 10 bucks says it's something in the wiring. Or hooked up wrong/partial.

I would go thru everything and check....power to battery/fuse then battery, ground is good, remote wire from amp to HU is fully functional, sub(s) inside sub enclosure is tight, I mean speaker wire, I have seen them fall off the terminals of the subs, speaker wire in correct terminal of the amp, etc.