Power Question

[krazzyboy44 10+ year member]

will it be best to power 4 pioneer ts-w3004 subs with 2 fosgate t10001bd or a single fosgate t30001bd

Click to read more...

 

[stones 10+ year member]

2 fosgate t10001bd

That way if one breaks down you still have 2 subs working untill it gets fixed.

 

[iagrdshaka 5,000+ posts]

2 fosgate t10001bd
That way if one breaks down you still have 2 subs working untill it gets fixed.

What? //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[krazzyboy44 10+ year member]

a single fosgate t20001bd a guy told at my local audio shop told me the two will be best cause they will give more power to the pioneers

 

[Raven 10+ year member]

2 fosgate t10001bd
That way if one breaks down you still have 2 subs working untill it gets fixed.

X2, that's an assload of power. If you decide you don't want bass that loud, you can easily tone it down by taking one out later on and selling it.

 

[krazzyboy44 10+ year member]

i meant to say two fosgate t10001bd or a single t20001bd he told me two of the t10001bd will have more ower

 

[Cbass 10+ year member]

those subs are dual 2ohm... you will have to buy the t20001bd cause those amps produce their "max" power at 1ohm and to get that load you'll have to wire the subs series/parallel

 

[Cbass 10+ year member]

and with two subs per amp you'll have to wire them 2ohm or .5ohm and at 2ohm there is no enough power and those amps are not .5ohm stable daily

 

[Cbass 10+ year member]

those subs can handle lots of power... it would be nice if you could get a T30001BD

 

[krazzyboy44 10+ year member]

so which will be the best choice two amps or one