power diamonds

[Mooseaudiophile 10+ year member]

hey any of you diamond audio users, what amps do you guys use to power subs and comps?

Click to read more...

 

[XtrmAudioCncpts 10+ year member]

an amp that could power all at once is the jbl gto755.6

 

[Ignatowski 5,000+ posts]

I use a DA 5600.2 on comps

DA1500.1 on subs

 

[cappy72 10+ year member]

d5 1200.1 n subs and a d5 600.4 on interior

 

[purerx7tt 10+ year member]

i have two m6 mk2 12" and have a hifonics 1500bx powering them

 

[Strecker25 10+ year member]

d1200.1 viper on 2 M6's

and a profile cl800 on 2 5.25" m6's

 

[iLL-Faded 10+ year member]

T10001bd to power my 2 10" MKII M6's as for the speakers i used the T8004 to power them

 

[klassic 10+ year member]

I use a Pheonix Gold 500.4Ti with two channels running M361 components with 75x2w and one 10" M6 powered by the other two channels bridged into 2ohms (rated at 250 into 4ohms, 2ohm stable bridged but unrated). The amp being underated and running in 2ohm's bridged gets the job done quite nicely.

 

[nine9sH 10+ year member]

Im using a ppi pc4800 on my hex's. Probably upgrade to a zapco c2k soon when I have funds available.

for subs Im currently running a pc 21400 on my 12w7. Just got a zapco c2k 6.0 to replace the 21400 just havent had the time to swap it out yet.

 

[CntInjaDisNinja 10+ year member]

bx1000D on two 12" CM3's

MTX2200 on DL661S comps

 

[Prowler573 5,000+ posts]

It's all in my signature.......

 

[Bartak1 10+ year member]

Sent my money for a D5600.1 for my Atlas's. 600 watts at 2 ohm. Cant wait till i get it in //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Shyne151 10+ year member]

I have a viper 1200.1 on my cm3 12"s.

 

[Berry47 10+ year member]

Diamond D5600.1 and 600.4

 

[bri487 5,000+ posts]

i have a d51200.1 on a tdx 12". in my boat i have two xtant 4.4's on eight cm3 6.5"s. in my truck as of tomarrow i will have a JL 300/2 on some d6 comps. i had in my cobra about a year ago a c2k-6.0 on some hex 6.5"s in a plate i made. that had a zapco sx-sl eq on them too.