Power Acoustik Anyone?

[fijunkie88 10+ year member]

No, they are rated at 2,300 wRMS @ 1ohm.

we benched one at .75/14.4...it was 1400rms...pathetic //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[Annnarbor84 5,000+ posts]

we benched one at .75/14.4...it was 1400rms...pathetic //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

Post up or stfu

 

[fijunkie88 10+ year member]

dont hate cause you havent been introduced to real power //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[Annnarbor84 5,000+ posts]

dont hate cause you havent been introduced to real power //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

Whatever pal your so full of shit it is not even funny. Where you from Louisiana, to bad you wouldn't have lost everything and slowly died from Katrina

 

[Xprime4 10+ year member]

we benched one at .75/14.4...it was 1400rms...pathetic //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

look pretty accurate to me.

 

[fijunkie88 10+ year member]

bottom line there is better amps out there...power acoutsik is cheap power...but you get what you pay for!!

 

[Annnarbor84 5,000+ posts]

bottom line there is better amps out there...power acoutsik is cheap power...but you get what you pay for!!

Your not posting any of these "test results" so your bad mouthing means absolutely nothing. And last time I checked, no one said these are the best amps, only that they are great for the price.

 

[VtecDis 10+ year member]

Pa is a decent brand. But, They are rated on 16v as far as I know. Expect about half of the rated RMS. Maybe a little more.

i just bought the BMAF 4000/D. sounds bad *** but not as loud as some hifonics 1600 ive heard. and Linkz is right, they ARE over rated. might be correct rating with 16 volts, but that isnt what the avg. car is putting out. it also does run warm, but def. not hot.

also, always keep in mind this formula: for every 1000watt RMS, the amp's fuses should total 90-100 amps. my BMAF comes with 120 amps for its fuse, indicating that the rms would only really be around 1200-1300 watts.

the hifonics bxi1608 has a total of 160 amps for its fuse... go figure its true rms from there //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

i only bought it cuz i didnt want to spend over $200 for an amp, and i got mine for $170. overall ild have to agree with everyone else, they are a great budget amp

 

[Annnarbor84 5,000+ posts]

i just bought the BMAF 4000/D. sounds bad *** but not as loud as some hifonics 1600 ive heard. and Linkz is right, they ARE over rated. might be correct rating with 16 volts, but that isnt what the avg. car is putting out. it also does run warm, but def. not hot.
also, always keep in mind this formula: for every 1000watt RMS, the amp's fuses should total 90-100 amps. my BMAF comes with 120 amps for its fuse, indicating that the rms would only really be around 1200-1300 watts.

the hifonics bxi1608 has a total of 160 amps for its fuse... go figure its true rms from there //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

i only bought it cuz i didnt want to spend over $200 for an amp, and i got mine for $170. overall ild have to agree with everyone else, they are a great budget amp

Where did you learn that at, church?//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[jdawg 5,000+ posts]

its actually fairly accurate

 

[VtecDis 10+ year member]

Where did you learn that at, church?//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

from your mom, actually. moron. and BIG THNX JDAWG. so many people talk shit here, and they dont even know what their talking shit about. im surprised if people dont realize that fuse amps matter.

and... church? wtf?

annarbor84 = epic failure

if your birth year is 84, i would expect you more mature then that. grow up little boy.

 

[Annnarbor84 5,000+ posts]

from your mom, actually. moron. and BIG THNX JDAWG. so many people talk shit here, and they dont even know what their talking shit about. im surprised if people dont realize that fuse amps matter.
and... church? wtf?

annarbor84 = epic failure

if your birth year is 84, i would expect you more mature then that. grow up little boy.

You know nothing, and never will you fu cking douchebag. I hope your car burns to the mags:fyi:

 

[Annnarbor84 5,000+ posts]

from your mom, actually. moron. and BIG THNX JDAWG. so many people talk shit here, and they dont even know what their talking shit about. im surprised if people dont realize that fuse amps matter.
and... church? wtf?

annarbor84 = epic failure

if your birth year is 84, i would expect you more mature then that. grow up little boy.

Your idea of "fusing" is beyond fuc ked up to say the least. Stop spreading bad info to good people you stupid fu ck

 

[MakeshiftAudio 10+ year member]

You know nothing, and never will you fu cking douchebag.

x2

150A*14.4V=2160W, assuming 100% efficiency

(2000/.9)/14.4=154.3A, assuming 90% efficiency

(2000/.8)/14.4=173.6A, assuming 80% efficiency

A (Bussmann) 30A ATC fuse will allow an average of 85A for 1 second constant before melting.

A (Bussmann) 30A ATC fuse will allow an average of 52A for 10 second constant before melting.

A (Bussmann) 30A ATC fuse will allow an average of 45A for 100 second constant before melting.

Assuming a 2kW has 5 30A ATC fuses, that would mean it would allow... Okay, if you don't get the point, you need to just go... *Sigh.* People... //content.invisioncic.com/y282845/emoticons/*******.gif.a649d21efc0d1fd4890a6428166586c1.gif

Edit: I am not saying PAs can do rated, I'm just saying that this guy learn his stuff at church, and believes whatever he hears. Get the fu ck out of here so we don't have more people like you spreading this information to muck up the forums.

 

[infamous_e46 5,000+ posts]

i just bought the BMAF 4000/D. sounds bad *** but not as loud as some hifonics 1600 ive heard. and Linkz is right, they ARE over rated. might be correct rating with 16 volts, but that isnt what the avg. car is putting out. it also does run warm, but def. not hot.
also, always keep in mind this formula: for every 1000watt RMS, the amp's fuses should total 90-100 amps. my BMAF comes with 120 amps for its fuse, indicating that the rms would only really be around 1200-1300 watts.

the hifonics bxi1608 has a total of 160 amps for its fuse... go figure its true rms from there //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

i only bought it cuz i didnt want to spend over $200 for an amp, and i got mine for $170. overall ild have to agree with everyone else, they are a great budget amp