Power Acoustic GT1-6000D Vs. AudioPipe AP-30001 D

[conor_thompson 10+ year member]

I have both. Im guessing I should use the AudioPipe?

Click to read more...

 

[Side Show 10+ year member]

specs?

 

[Silverado SS 10+ year member]

Dirty power vs more dirty power you pick. Use the AP out of the two

 

[conor_thompson 10+ year member]

Supposed Power Acoustik power:

Channel 1

RMS@4Ω 2300W mono

RMS@2Ω 3000W mono

RMS@1Ω 3700W mono

Max Power 6000Watt

Supposed AudioPipe:

1800 Watt x 1 Channel @ 4 Ohm

3000 Watt x 1 Channel @ 2 Ohm

2 x 3000 Watt @ 1 Ohm

 

[Beatin' 10+ year member]

the power acoustik amp has a fuse rating of 150A.

I would guess that the amp can do 1,500-1,800wrms at 1 ohm.

My PPI black ice 1800.1 is rated 1800wrms at 1 ohm and has a 160A fuse, for reference.

 

[Jimmy Rustler 10+ year member]

In that case I guess it would just depend where you need your power at 1Ω (Power Acoustik) or 2Ω (Audiopipe).. Could always sell them both and get a decent used 2-3k.

 

[Side Show 10+ year member]

^^ THIS GUY, exactly... depends on what you need to wire your subs too... I always go for power over looks with my amps

 

[conor_thompson 10+ year member]

Yeah I gotta wire them to 2 ohm so I guess il use the AP. Just curious why this amp doesnt have any visible fuses?

 

[Jimmy Rustler 10+ year member]

It has no on-board fusing, however you are still recommended to use an inline fuse on the main power wire going into the amp. The fuse rating for the AP should be 250-300 amps.

 

[conor_thompson 10+ year member]

So should i have one by my battery & one by amp or just by the battery?