possible to get a dynamat install service?

[Foote 10+ year member]

Wondering if I can do that...some place that lets you drop off your car, and for a fee, they sound-deaden it for you? //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Click to read more...

 

[Flipx99 5,000+ posts]

I sure an installation shop would do it.

It isn't hard, just tedius to do it correctly.

If you don't push it down good then it is not worth doing

 

[Foote 10+ year member]

just im pretty sure my old beat up 1990 Blazer S-10 is gonna rattle its *** off when I put the two 15" Kicker L7's in it...powered by 2000-2600 rms and I dont want it to sound like shit...

 

[danz24 10+ year member]

ya it can get pretty expensive too, sometimes 50$/hr, its fun to do it yourself if you have a day off or something

 

[jmanpc 5,000+ posts]

gimme 500 bucks and the deadener and i'll do it

 

[Foote 10+ year member]

ya it can get pretty expensive too, sometimes 50$/hr, its fun to do it yourself if you have a day off or something

I cant find any good guides...I gotta have pretty a pretty detailed guide to go by before Ill try. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[danz24 10+ year member]

http://www.raamaudio.com/cgi-bin/index.cgi?p=ht this was the only guide i used.

it helps to get a guide for your car so u know how to remove seats etc... just in case

 

[Flipx99 5,000+ posts]

I made a tool out of mdf far better than anything second skin or anyone else offers.

It is a 3" x 6" piece of mdf with one 3" side rounded over. Then I rounded over on of the .75" lengths. Then I took a grinder and made a little grove for my thumb. 10 minutes worth of work and I got a tool way better than anything you can buy.

 

[audioholic 5,000+ posts]

I made a tool out of mdf far better than anything second skin or anyone else offers.
It is a 3" x 6" piece of mdf with one 3" side rounded over. Then I rounded over on of the .75" lengths. Then I took a grinder and made a little grove for my thumb. 10 minutes worth of work and I got a tool way better than anything you can buy.

A pic is worth a thousand words. And its hard to beat a roller. I'll believe this wonder tool when I see it. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[goodstuff 10+ year member]

I used a drumstick among other things it worked pretty good for tight spaces and you can hold it sideways and used it like a roller.. And yes you can pay to have it done but if I was doing it I would charge out the ***...someone said 500 and deadener...that sounds about right for front doors lol...just time consuming and a real ***** to do it right...I would do it myself as a shop is not going to do a good enough job unless you pay them some serious cash/