Porting like this?

[qtipextra 5,000+ posts]

Ok, so first of all, the drawing is to kind of to show where the port would be on this box. First, I am wondering if it is ok to run a port like this, from the back, immediately to the right?

Second, if doing a port like this, would you measure port length beginning at the blue line, or at the red line?

Click to read more...

 

[Immacomputer 10+ year member]

If you have to, do it like this:

Where green is the effective port length, blue is your port width, red is the edge of the effective enclosure volume, and the black line is a 45* piece of wood you should insert to reduce turbulence.

You should really just fire the port to the left side.

 

[qtipextra 5,000+ posts]

Thanks for the info man. I cant port on the side, there is no room.

I have come to 4 different port/sub positions:

#1:



#2:



#3:



#4:



The port (would) be firing towards the back, just so you can tell relative position.

Which would you recommend? I would prefer NOT to go with #1 if possible, but I might be able to work with it if it is a good position.

 

[Immacomputer 10+ year member]

#3 for sure.

 

[x2o 10+ year member]

#3 for sure.

x2, I would go with #3 or #4.

 

[Anniku989 10+ year member]

This for the SE's? Just curious

 

[kovemaster559 5,000+ posts]

number 4 or nuber 1 with the moofas on the other side

 

[qtipextra 5,000+ posts]

This for the SE's? Just curious

No, a new build I am thinking about doing in the distant future.

#3 it is (for now)

 

[qtipextra 5,000+ posts]

Another question. How far away from the back should the port be for optimum performance?

 

[bdawson72 5,000+ posts]

3 or 4

 

[Cravingbass123]

off subject

i think you take wayyyy toooo many pics of ur durango.

suriouslllyy

lulz