Port Length Help

[ctmaudi 10+ year member]

I cut the first one kind of bad. So I cut the other directly in half, and sanded them down to 5.75in. Good enough to glue them together now?

 

[Phoenix Risen 10+ year member]

I cut the first one kind of bad. So I cut the other directly in half, and sanded them down to 5.75in. Good enough to glue them together now?

it may be in theory yes. as long as your sure you have them where you need them.

 

[ctmaudi 10+ year member]

Fully assembled they are 11.75in long each.

Man this ABS glue stinks lol

 

[pro-rabbit 5,000+ posts]

lol, sorry. I have not been on because I'm down in Padre. I should have just gave you my number.

 

[Phoenix Risen 10+ year member]

silly rabbit, numbers are for customers

 

[ctmaudi 10+ year member]

Got a good 2 hours of listening in today. Lows seem noticeably louder, but a lot of songs I listen to that have higher bass notes (rock and techno) now have little to no bass.

Im wondering how it would be if I put a set of shallow 8s in the rear deck and seal them well for the ~70Hz-150Hz range.

Subs wouldnt fit in the box with the rubber ring on them. Had to take them off untill I can sand the holes down a bit. Box fit perfectly though, and I now have usable trunk space.





That board in the trunk is going to be a shelf above the sub box soon for the amps and battery.



Have about 6in high of space there.

 

[pro-rabbit 5,000+ posts]

Got a good 2 hours of listening in today. Lows seem noticeably louder, but a lot of songs I listen to that have higher bass notes (rock and techno) now have little to no bass.
Im wondering how it would be if I put a set of shallow 8s in the rear deck and seal them well for the ~70Hz-150Hz range.

Subs wouldnt fit in the box with the rubber ring on them. Had to take them off untill I can sand the holes down a bit. Box fit perfectly though, and I now have usable trunk space.





That board in the trunk is going to be a shelf above the sub box soon for the amps and battery.



Have about 6in high of space there.

Hey, PM me and let me know how off that cutout was for the flush ring. I went by what Jacob had listed on his site then added 1/8". It may be off a bit on the site though.