trying to design a box for Honda crv for two 15 re sx 1000rms each dvc what be better for loud and better pounding bass sub up port back or sub & port back and also need diagram or layout on making this box thanks guys
- Thread Starter
- #2
anyone
If you are looking for a box design there are a number of people on this site that design for a fee. Or you can learn to do it yourself (http://www.caraudio.com/forums/enclosure-design-construction-help/560833-about-make-thread-about-box-design-read-first.html) My recommendation is sub up port back, but about a million factors can affect if that is what is best for you or not. That would be my starting guesstimate.
nvturbo 10+ year member
Senior VIP Member
Even though a good box enclosure does make a difference, what amp are you using to drive the subs?
Activity
No one is currently typing a reply...
Similar threads
It depends on the brand. My JL has 500k Ohms, old Fosgate has 80k Ohms, and old Orion has 80 Ohms. These are the ones I had on hand for testing.
- Started by Phatboiondiet
- Wiring, Electrical & Installation 2
Yeah, saw that too, was like ??? wtf! They do know there stuff, I usually just roll with it!
- Started by Justin Salaro
- Subwoofers
You could try to make the port longer, but there might be other reasons with the box won't extend lower, or even the sub. You'd have to reverse...
- Started by Manu
- Enclosure Design & Construction
While that program is pretty neat, it assumes you know the values. I was just recapping the numbers you provided. RS recommends the following...
- Started by JuiceTin
- Enclosure Design & Construction
Whoa, that will be one skinny port. The width of the back wall ports will be 1.08" wide (27.5mm), but the front port will be shared by 2 subs so...
- Started by MitchnSystem
- Enclosure Design & Construction
About this thread
New threads
-
Low volume ONLY while drivingI have a Skar svr-10 inch sub and a skar rp-800.1d 800w rms...
- Started by Maddoxp07
- Replies: 0
-
WANTED Down4Sound MM1004 GrayWould like a gray D4S MM1004 to match my other gray MM1004...
- Started by kenvicta
- Replies: 0
-
What's this worth?Going to go on a different direction when I get my new...- Started by chillin
- Replies: 4
-
-
Multi speakersHello all, need some wiring advise for some speakers. I have...- Started by 07FLSTC
- Replies: 2