bds0688 10+ year member
CarAudio.com Elite
I do not have pics currently, parts are still in the garage and I would like to see interest before messing with photobucket and stuff. Thanks for the patience if you are interested.
Phoenix Gold ZX350
6/10 Cosmetic
9/10 Functionality
Paint is chipped/flaking on the bottom in one corner. Your usual scratches from years of use(I am at least its second owner in the past three years). Side windows are intact and clean.
There's noise on some dials and buttons WHEN ADJUSTING ONLY. When playing there was no noise as a result of that. All set screws are intact, pass through works. Will throw in a PG Bass control knob in case you have a small sub going on it, or just for fun, I won't need it anymore.
140 shipped obo
Alpine CDA-9807.
Has remote, faceplate carrying case, and a newer wiring harness as my old was running out of wires to splice. Fascia has the typical wear and tear. All the buttons still click, no sticking. No cracks or dead pixels/spots on the screen. Some nicks/scratches from a nasty fall.
Radio receiver may be spotty, but I could never really track it down to a ground, the wire from the antenna itself, or the board. Was hit and miss, so I don't know. All the outputs work, cd player still loads and plays quickly. No issues reading any of its supported formats. I had a topic way back when where I suspected the mechanism to eject may have been having issues. I took off the faceplate and the trim, reseated them and have not had an issue since. It didn't get stuck per se, just acted like it detected an obstacle.
60 shipped obo.
About 20-25ft of Knu 0 Guage. Exact model line escapes me. Some fuses, fuse holders. I have some fittings and a ground distribution block as well. Best offer on whatever interests you and its yours. 12 and 14 gauge speaker wire.
Thanks for any interest and responses. I'll get pics up if requested, just none handy at this hour.
Phoenix Gold ZX350
6/10 Cosmetic
9/10 Functionality
Paint is chipped/flaking on the bottom in one corner. Your usual scratches from years of use(I am at least its second owner in the past three years). Side windows are intact and clean.
There's noise on some dials and buttons WHEN ADJUSTING ONLY. When playing there was no noise as a result of that. All set screws are intact, pass through works. Will throw in a PG Bass control knob in case you have a small sub going on it, or just for fun, I won't need it anymore.
140 shipped obo
Alpine CDA-9807.
Has remote, faceplate carrying case, and a newer wiring harness as my old was running out of wires to splice. Fascia has the typical wear and tear. All the buttons still click, no sticking. No cracks or dead pixels/spots on the screen. Some nicks/scratches from a nasty fall.
Radio receiver may be spotty, but I could never really track it down to a ground, the wire from the antenna itself, or the board. Was hit and miss, so I don't know. All the outputs work, cd player still loads and plays quickly. No issues reading any of its supported formats. I had a topic way back when where I suspected the mechanism to eject may have been having issues. I took off the faceplate and the trim, reseated them and have not had an issue since. It didn't get stuck per se, just acted like it detected an obstacle.
60 shipped obo.
About 20-25ft of Knu 0 Guage. Exact model line escapes me. Some fuses, fuse holders. I have some fittings and a ground distribution block as well. Best offer on whatever interests you and its yours. 12 and 14 gauge speaker wire.
Thanks for any interest and responses. I'll get pics up if requested, just none handy at this hour.