please help step by step of building a box for 15A

[mdd99 10+ year member]

can you tell the step: what i need to buy, where to buy them...anything in the process of building a box... and if i dont' have the hole cutter thing where can i go to get a hole cut out..

thank for helping..

Click to read more...

 

[kingpin_jeffie 10+ year member]

4'x8' sheet 3/4" mdf

# 8 1 5/8" wood screws

Wood Glue

Silicone caulking

Jig Saw

Drill

All available at local hardware store.

 

[HUDI 10+ year member]

u might wanna work out ur sizes 1st &how much mdf u need

 

[kingpin_jeffie 10+ year member]

Well if its one of the boxes off eD's site then a 4x8 sheet will give you enough to build the box and have enough left over to build an amp rack or two.

 

[mdd99 10+ year member]

# 8 1 5/8" wood screws

how many

is that 1 and 5/8 inches you mean

 

[namster44 10+ year member]

yes, you will need about 100000, or more....

actually, 50 will be more than enough.

 

[mdd99 10+ year member]

and where do you put the screw ..i dont' see anyone use screw for their box

 

[musthavemuzk 10+ year member]

http://www.dbfanatics.com/forum/photo_album_cat.asp?sqldtl=16

while i have been told i go overboard with them....that is just how i do it.

look in the sub box category.

Monty

 

[kingpin_jeffie 10+ year member]

musthavemuzk your quite mad you know.

but then again your attention to detail is probably why your hitting in the 150's with your A and I'm not.