KicktheSDbasshead
2 builds 2 feet
Can any one give me basic information on aero ports and tuning anything will help. 3.5 cubes sealed how can i get it low to maybe 30hz
Can any one give me basic information on aero ports and tuning anything will help. 3.5 cubes sealed how can i get it low to maybe 30hz
I'm going to use a couple jl w3 12 but the box will be sealed im trying to figure out what length and width of the port can get me lower the amp will be kicker zx 1000.1
Ok thanks. So would you raise the cubes to compensate for the aero port?Seaed and ported mean 2 different things.
For 2 w3 12's you would aim for around 2.5- 3 cubic feet sealed and 3.5-4 cubic feet ported. It's not as simple as just putting a port in a sealed enclosure.
If your current enclosure is 3.5 cubic feet sealed, you could try putting an aero port in, but you will be taking up a good bit of space with a 6" aero port and would probably end up with too little volume overall.
Matt
Ok thanks. So would you raise the cubes to compensate for the aero port?