big dawg 10+ year member
Junior Member
First off I would like to say that I am very excited to be able to contribute to this forum after reading and gaining so much knowledge from you guys. I have never done a true product review but I will do my best and add to it as often as more opinions develop about it.
Today, I recieved my new amplifier. It is the Planet Audio BB1400.1. The specs are as follows:
MAX POWER (1 OHM) 1900W X 1
RMS POWER (1 OHM) 1400W X 1
RMS POWER (2 OHMS) 1000W X 1
RMS POWER (4 OHMS) 625W X 1
SIGNAL-TO-NOISE RATIO 100dB
FREQUENCY RESPONSE 20-250Hz
DIMENSIONS 17-3/4”L x 2”H x 6-7/8”W
The first thing that I noticed about the amp when I opened the package was that This amp is VERY small but very attractive. Black with a blue logo on the far corner of the face and, the best part about it is when the amp is powered up, the logo illuminates blue. I personally feel like between its looks and its size, it would be perfect for custom installs. The thing that i was really confused about was that it came with a birth certificate and it was so generic, I feel like it is a waste to even include. Generally when you get a birth certificate, the ouput recorded varies from what is stated as the amps rms ouput, and generally they are tested at 12.5 or 13.8... This amp was tested at 14.4 and all of the results were dead on what they say is the rms @ 2 ohms and 1 ohm. Too me... I call ********. I feel like they just wrote it in and shipped it.
The next issue that I had was when I called tech support to try to get some clarification about the birth certificate. The tech guy got on the line and was very very dry, rude and short, I explained to him that for the life of me, I could not understand how an amp tested at 14.4 volts and put out 1400 watts could also put out 1900 watts. He got very frustrated with me and said "forget about everything that you read on the website. The birth certificate is what you should go by". Then he hung up on me... Awesome.
Anyhow after I installed the amp in my car I wired in a 15 inch solo baric L7. I gotta be honest. With the gain at about a quarter, It had this sub jumping out of the box. The little bastard definitely performed. I also noticed that it came with a control knob to mount up front and is capable of being strapped to another amp. With the fuse size only being a total of 160 my charging system will have no problem powering this and a 4 channel as well. The best thing about this amp however; is the fact that it comes with a 5 year warranty... I am looking forward to putting this on my MTX 9500 within the next week. I am hoping that I can buy the matching 4 channel soon as well. If you guys have any questions, please post them and I will answer asap. I am not exactly sure what to look for in a review so bare with me.
Today, I recieved my new amplifier. It is the Planet Audio BB1400.1. The specs are as follows:
MAX POWER (1 OHM) 1900W X 1
RMS POWER (1 OHM) 1400W X 1
RMS POWER (2 OHMS) 1000W X 1
RMS POWER (4 OHMS) 625W X 1
SIGNAL-TO-NOISE RATIO 100dB
FREQUENCY RESPONSE 20-250Hz
DIMENSIONS 17-3/4”L x 2”H x 6-7/8”W
The first thing that I noticed about the amp when I opened the package was that This amp is VERY small but very attractive. Black with a blue logo on the far corner of the face and, the best part about it is when the amp is powered up, the logo illuminates blue. I personally feel like between its looks and its size, it would be perfect for custom installs. The thing that i was really confused about was that it came with a birth certificate and it was so generic, I feel like it is a waste to even include. Generally when you get a birth certificate, the ouput recorded varies from what is stated as the amps rms ouput, and generally they are tested at 12.5 or 13.8... This amp was tested at 14.4 and all of the results were dead on what they say is the rms @ 2 ohms and 1 ohm. Too me... I call ********. I feel like they just wrote it in and shipped it.
The next issue that I had was when I called tech support to try to get some clarification about the birth certificate. The tech guy got on the line and was very very dry, rude and short, I explained to him that for the life of me, I could not understand how an amp tested at 14.4 volts and put out 1400 watts could also put out 1900 watts. He got very frustrated with me and said "forget about everything that you read on the website. The birth certificate is what you should go by". Then he hung up on me... Awesome.
Anyhow after I installed the amp in my car I wired in a 15 inch solo baric L7. I gotta be honest. With the gain at about a quarter, It had this sub jumping out of the box. The little bastard definitely performed. I also noticed that it came with a control knob to mount up front and is capable of being strapped to another amp. With the fuse size only being a total of 160 my charging system will have no problem powering this and a 4 channel as well. The best thing about this amp however; is the fact that it comes with a 5 year warranty... I am looking forward to putting this on my MTX 9500 within the next week. I am hoping that I can buy the matching 4 channel soon as well. If you guys have any questions, please post them and I will answer asap. I am not exactly sure what to look for in a review so bare with me.