Phoenix Gold TI10's?

[pwr2max 10+ year member]

I am basically looking for subs that are very accurate but that also get very loud and based on the deal at the zeb for the pg TI10's i am considering these. Anyways, those of you that have heard them or have them, how do you like them? Do you think they will suit my needs if i run them off of a PG TI800.1? Also, how durable are they (if i get them they will be consantly exposed to sunlight because my car is a hatchback)? thanks.

Click to read more...

 

[pwr2max 10+ year member]

thanks for the advice. Ill keep that in mind, but what about the subs?

 

[pwr2max 10+ year member]

which would be louder: 2 svc TI10's wired parallel to get a 2 ohm load or 2 dvc TI10's wired in series in then in parallel to get a 4 ohm load. The TI800.1 supposedly puts out 800 wrms at 4 ohms and 1000 wrms at 2 ohms and i do not really want to run it at 1 ohm unless i am absolutely sure that the amp can handle that load while still staying cool or warm.

 

[Bryce M 10+ year member]

If PG says it will take one ohm it will take one ohm no problem

The ti series amps have built in fans as well they are awesome amps but cost good $$$ you can get a jbl 1200.1 for nearly 1/2 as much and it puts out may power at 2 ohms rember the dvc ti's will cost you 100 bucks a piece compared to 57.95 for the single coils

 

[pwr2max 10+ year member]

is there a benifit to having dvc's other than wiring options (ie better performance or anything)?

 

[crazymzungu]

I got a Best Price code at the ZEB for the Ti10D's if that's what you would prefer. $57.95 each. The code it: 5P6096

It's only good through June 15th, so you have to hurry. I'm running 2 of them right now & they sound great.

 

[mavrix 10+ year member]

I got a Best Price code at the ZEB for the Ti10D's if that's what you would prefer. $57.95 each. The code it: 5P6096It's only good through June 15th, so you have to hurry. I'm running 2 of them right now & they sound great.

DUDE! SWEET JESUS? $57.95 a piece? ****! $71.95 was my price check - I was debating buying them at that price, but shoot, just a little more than $100 for a pair shipped, I'm all over that. Buying them as I type. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[pwr2max 10+ year member]

thanks alot everyone, but do any of you know for a fact if the pg ti amps can handle a 1 ohm load with out getting excessively hot (once again all this stuff is going in the trunk of a hatchback so temp will be critical especially in lots of sun)?

 

[pwr2max 10+ year member]

whats wrong with wiring to a 2 ohm load using the svc ti's (i would get more power to the subs that way)? Is it because the amp will get alot hotter at 2 ohms or other loss in performance?

 

[pwr2max 10+ year member]

I also made a mistake before...in the owners manual of the ti800.1 it says that it makes 400 watts at 4 ohms and 800 watts at 2 ohms and a dynamic power of 1000 watts at 2 ohms. So woudnt it sound alot better if i wired the subs to 2 ohms using the svc ti's?

 

[pwr2max 10+ year member]

How does 473 sound for 2 TI10's and the TI800.1? that is with the coupon code for the subs.