PG Titanium Elite blown?

[scotsman 10+ year member]

Well when I was bumping with my PG titanium elite it sounded like it was blown so I went ahead and ordered a new cone. I just got the cone out and it doesn't look blown at all to me. What are you guys opinions on this?

New cone on the left old on the right

old cone

new cone

Click to read more...

 

[scotsman 10+ year member]

no one even viewing?

 

[Towncar 10+ year member]

It does appear to be burned around the coil. What kind of amp did you run to it, and how did you go about setting the gains? That sub can take loads of power, something was done wrong..

 

[scotsman 10+ year member]

Xenon 1200.1 with the gain around halfway. I think my frequency may have been off from the box if that does anything?

 

[Towncar 10+ year member]

Xenon 1200.1 with the gain around halfway. I think my frequency may have been off from the box if that does anything?

Saying you set the gain half way does not tell us anything. Did you use a dmm at all?

 

[Rich B 5,000+ posts]

Smell the coil on the old one.

Smell burned?

 

[scotsman 10+ year member]

didn't use a dmm what voltage should I be looking for on a dmm for that amp 1200 @ 2? Smells different from the new cone?

 

[denim 5,000+ posts]

Always wanted that sub.

 

[Towncar 10+ year member]

didn't use a dmm what voltage should I be looking for on a dmm for that amp 1200 @ 2? Smells different from the new cone?

you should be looking for about 49 volts. Once reconed set the amp to read 49 volts, and dont forget about setting your subsonic filter if you are running it ported.