over kill car ?

[Boominburban 10+ year member]

naw, I will need the full Thiele - Small parameters for the sub ...

 

[shadowm891 10+ year member]

i'm not sure what you mean but here is the link for the spec's and such my is the sa-10 dvc 4 ohm SA Series

 

[Boominburban 10+ year member]

can't see last page again ........

 

[shadowm891 10+ year member]

View attachment 26551523

 

[shadowm891 10+ year member]

i hope that helps if not just let me know if there anything else you need and i can see what i can do //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Boominburban 10+ year member]

yep, that was it ...

 

[Boominburban 10+ year member]

Nope, you won't have enough room for two 10's vented ... 38x15 1/4x13 3/4 ....

 

[Boominburban 10+ year member]

best I can get it to is 35x15.5x15 ... 3.62cuft gross (2.0 net) tuned @ 35hz per sundowns rec.

 

[shadowm891 10+ year member]

would it be possible to go aero port instead of vented. i hear if tune right aero port can sound good to. if not i can add more death to the box if needed to make up for the rest if that will work i just need to know how much more i would need.

 

[Boominburban 10+ year member]

vented = ported

 

[shadowm891 10+ year member]

wow i feel dumb now lol. i always figure vented was like a slotted port and aero port or was a pcv pipe or somthing

 

[Boominburban 10+ year member]

aeroports just aren't tuning out right ...

 

[Boominburban 10+ year member]

wow i feel dumb now lol. i always figure vented was like a slotted port and aero port or was a pcv pipe or somthing

aeroport is just a style/brand of port (vent)....

 

[Jeffdachef 5,000+ posts]

both are classifed as ported. You have slot port and aeroports.

Flared aeroports take up less space and is more efficient than an slot port. Add more depth and do two 4 inch flared aeros.

its easier to a proper sq inch port area per cubic feet ratio if its a side port.

 

[shadowm891 10+ year member]

both are classifed as ported. You have slot port and aeroports.
Flared aeroports take up less space and is more efficient than an slot port. Add more depth and do two 4 inch flared aeros.

its easier to a proper sq inch port area per cubic feet ratio if its a side port.

so what you saying is with the amount of space i have if i add 4 more inches to depth to the box and run 2 4 inch flared aero ports instead of a vented box i could run 2 10's then ?