Orion2500 quick question

[Raisedin305 5,000+ posts]

OK I was adjusting the LPF to my desire and then the when I went to turn on the power on my HU the amp didnt turn on. I realized that the remote wire was loose and 1 of the 2 power wires was out. I know I can simply connect the remote wire back in but could I just plug the power wire back into the amplifier without blowing the amp or a fuse or do I have to go and disconnect the battery and all that to plug it back in?

Click to read more...

 

[Mr. Opportunist 10+ year member]

turn car off and plug it back in.

 

[Raisedin305 5,000+ posts]

...

 

[Raisedin305 5,000+ posts]

...

 

[Raisedin305 5,000+ posts]

turn car off and plug it back in.

Yeah but will sparks come out when I connect it into the amplifier? Because thats not suppose to happen when connecting the power into the amp.

 

[Raisedin305 5,000+ posts]

Im running 0 gauge from the battery then to a 0/4 gauge ditro block where I have two 4 gauge wires running to the amp which are my power wires. One of them got disconnected from the amp.

 

[Raisedin305 5,000+ posts]

Plugged the remote wire back in and the amp turns on but its suppose to run with two 4 gauge power wires not just 1 so I need to know do I disconnect the battery - and + then plug it in or can I just plug it back into the amp?

 

[Raisedin305 5,000+ posts]

turn car off and plug it back in.

Has this ever happened to you?

 

[Mr. Opportunist 10+ year member]

yes just plug it back in

 

[Raisedin305 5,000+ posts]

yes just plug it back in

Ok seeing your from Team Phat Hertz you should know what your talking about so I'll talk your word.

 

[dustinr 10+ year member]

Ok seeing your from Team Phat Hertz you should know what your talking about so I'll talk your word.

//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

 

[Raisedin305 5,000+ posts]

Dammn now I can find the allen wrench I need for the power

 

[dustinr 10+ year member]

Dammn now I can find the allen wrench I need for the power

....

Disconnect your battery be4 you even begin to think about putting that power wire back into your amp.

 

[Raisedin305 5,000+ posts]

....

Disconnect your battery be4 you even begin to think about putting that power wire back into your amp.

Thats what I thought I had to do but custel told me just to plug it back in:eyebrow:

 

[dustinr 10+ year member]

Thats what I thought I had to do but custel told me just to plug it back in:eyebrow:

Hence why I rolled my eyes. Some people just go the quick route w/o caring.. but I'd rather spend 5 more mins un-hooking my battery to make sure everything is ok.