No Pics Yet - Two New Guns - Opinions?

[DDSC 10+ year member]

my guess would be l to r .22long 17 hmr 7.62x39 and .243

hmmm this guys close, cant tell you which ones are wrong yet tho, anyone else

 

[evildave101 10+ year member]

hmmm this guys close, cant tell you which ones are wrong yet tho, anyone else

243=.22-250?

 

[DDSC 10+ year member]

243=.22-250?

//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif whats the other one

 

[evildave101 10+ year member]

//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

is that where i was wrong?

edit: the .17?

 

[DDSC 10+ year member]

well I dunno what the 7x whatever is, I just know what gun it goes in

 

[evildave101 10+ year member]

.17 mach2

 

[DDSC 10+ year member]

.17 mach2

the 3rd ones a AK round:

 

[evildave101 10+ year member]

well I dunno what the 7x whatever is, I just know what gun it goes in

if it is a 7.62x39 it goes in an AK, SKS, mini30.......

 

[evildave101 10+ year member]

so that other is a .17 hmr?

 

[DDSC 10+ year member]

I dunno what the hmrs for, my uncle just said it was a 17 caliber rifle, i want one though. He shot a ground hog at about 130 yards and said it was shooting flat. Only thing was he said if the winds blowing you can forget about it

 

[evildave101 10+ year member]

I dunno what the hmrs for, my uncle just said it was a 17 caliber rifle, i want one though. He shot a ground hog at about 130 yards and said it was shooting flat. Only thing was he said if the winds blowing you can forget about it

there is a .17hmr, .17mach2

 

[Twistid 5,000+ posts]

So were original ops pics ever posted?

 

[DDSC 10+ year member]

there is a .17hmr, .17mach2

whats the diffrences, he had some with a redtip, yellow tip, and hollow pionts. From my understanding the ones with the plastic tip were just to reduce ricochets

 

[DDSC 10+ year member]

So were original ops pics ever posted?

no

 

[DidUHearThat? 10+ year member]

Wow your pretty ignorant. First off that first statement is just completely retarted.Second, have you ever heard of a class III license/dealer? Obviously not.

And final the knoxx drum conversion kits for the pump action shotguns are completely legal and do not make them a class 3 device like you stated earlier.

Okay junior Hitler your gonna keep showing your ass, I'm gonna keep kicking it.

NO, there is no such thing as a "permit" to convert semi's into full auto. None. Not even class III dealers can do that. There is no way for the OP to turn a semi into a full auto, except by commiting a felony. Manufacturing new machine guns to civillians was banned in '86 called the Hughes Amendement to the FOPA, aka the Machine Gun bill - USC.992(o). Probably long before you were born, kid. That is why old legal machine guns are so valuable, because no new ones can be made legally.

Read more, post less.

TITLE 18--CRIMES AND CRIMINAL PROCEDUREPART I--CRIMES

CHAPTER 44--FIREARMS

Sec. 922. Unlawful acts

(o)(1) Except as provided in paragraph (2), it shall be unlawful for

any person to transfer or possess a machinegun.

(2) This subsection does not apply with respect to--

(A) a transfer to or by, or possession by or under the authority

of, the United States or any department or agency thereof or a

State, or a department, agency, or political subdivision thereof; or

(B) any lawful transfer or lawful possession of a machinegun

that was lawfully possessed before the date this subsection takes

effect. (1986)

http://frwebgate.access.gpo.gov/cgi-bin/getdoc.cgi?dbname=browse_usc&docid=Cite:+18USC922

Sec. 924. Penalties

(a)(1) Except as otherwise provided in this subsection, subsection

(b), ©, (f), or (p) of this section, or in section 929, whoever--

2) Whoever knowingly violates subsection (a)(6), (d), (g), (h),

(i), (j), or (o) of section 922 shall be fined as provided in this

title, imprisoned not more than 10 years, or both.

The subject was imported semi auto shotguns, not domestic pumps. Fvck, can't you even read? Imported semi auto shotguns are covered under a different set of rules called the 922® rules.

The Saigas have a certain number of parts in their unmodified “Sporting” configuration. They are considered imported because they have more than 10 imported parts in them. As such they are held to 922 ® compliance.
If you want to use high capacity magazines, convert the weapon to pistol grip configuration or use a flash hider, it will then be considered unsporting. You will need to swap out parts so that you have no more than 10 imported parts in it. It will then be considered a US made firearm and 922® does not apply. See bottom of this post for more 922r info and some grey areas.

922 r in short…

Section 922r, of Title 18, U.S.C. prohibits assembly of certain semiautomatic rifles from imported parts. The implementing regulations in Title 27, Code of Federal Regulations (CFR) section 178.39(a), provide that no person shall assemble a semiautomatic rifle or any shotgun using more than 10 of the imported parts listed in paragraph © of this section if the assembled firearm is prohibited from importation under section 925(d) (3) as not being particularly suitable for or readily adaptable to sporting purposes.

For further information about 922®, go to the ATF Website or http://uscode.house.gov/ and search for 18 U.S.C. § 922r and 27 CFR § 478.39 of the Gun Control Act (GCA) of 1968.

http://forum.saiga-12.com/index.php?showtopic=18530

Sec. 924. Penalties

(a)(1) Except as otherwise provided in this subsection, subsection

(b), ©, (f), or (p) of this section, or in section 929, whoever--

D) willfully violates any other provision of this chapter ®,

shall be fined under this title, imprisoned not more than five years, or

both.

http://frwebgate.access.gpo.gov/cgi-bin/getdoc.cgi?dbname=browse_usc&docid=Cite:+18USC924

So STFU!!! //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[DidUHearThat? 10+ year member]

 

[MisterGrubbs 5,000+ posts]

And to the OP. You said you paid $350 for the mac 11? Sorry to say but thats a rip off, i paid about $250 for mine brand new and sold it shortly after, i hated that gun. It was constantly jamming and failing to feed. And when it did work it had a horrible trigger slap that got painful after a little while. If your looking for a fun carbine id HIGHLY reccomend you look into the beretta cx4 storm.

Where'd you pick up a new one for 250, if you dont mind me asking?

A friend of mine wants one, but he wants a blued one.

And around here, this part of GA at least, they're pretty **** hard to find. I've been calling dealers for the past year looking for a Mac-11/Tek9(dont ask) and had only gotten two hits in that year. One guy wanted 550 for his Mac-11 used and the other wanted 500 for his used. Both guns sold before I could get there to even look at them, and although it's odd I couldn't tell you why, so I assumed 350 was very reasonable with the barrel extension, two clips, and the body of the gun being chrome/nickel plated.

 

[MisterGrubbs 5,000+ posts]

Also - Opinions on how the list on the first page looks? I know some of the guns are mediocre at best, but they interest me. A better gun suggestion is more than welcomed, as I'm not going to stop at one in any style.

 

[lvjeffro 10+ year member]

can anyone guess what the rounds in my avi go 2???

.22

5.7

7.62X39

22.250 or 25-06

and to OP

To Get List:

Bushmaster carbon 15 model 4 (why not match your pistol)

Mossberg 590

AK-47 (Probably a Romanian)

Springfield 1911 .45

bushmaster Carbon 15 Type 97S...

Aralite AR-10 A4 (.308)

glock model 23 or 27 in .40 cal(awesome caliber)

glock model 38 or 39 in .45

There are soo many awesome weapons out that it comes down to your prefrence and what you want to do with it...good luck and happy safe shooting...

 

[evildave101 10+ year member]

lots of info and guns to look at here

http://world.guns.ru/main-e.htm