no bass:(

[kelly_u]

i have 2 solo baric 12"s

kenwood kac-9102D amp

when i change track the subs let out a nice big boom to confirm it but in the track almost nothing... low bass if any is let out ive been asking around the web noone can help me. please help asap

Click to read more...

 

[MisterGrubbs 5,000+ posts]

Grouding Problem? RCAs?

Or wait you have no bass at all? Is the amp in protect or is it just fine?

RCAs hooked up correctly and in the correct place?

Who hooked it up?

Remote wire hooked up? Amp turn on?

 

[skadude016 5,000+ posts]

gains could be to low

 

[mlstrass 5,000+ posts]

Or amp settings such as HPF or SSF are jacked. Need more info on how everything is set...

 

[Jumping Jeza]

yeah i had problem with mine the gain was turned down and rca's where getting interference with something

 

[XanderMoser 10+ year member]

Sounds like you have a slight grounding problem, you should reground your HU.

There's also a good chance you have a high pass filter on, filtering out all your bass. Then you might have turned the gain up to compensate, so the thump is huge, but no bass from music. Check all settings on the amp and come back.

 

[starkfu 10+ year member]

phase could be off, if one is moving 180 degrees out of phase of the other, you won't get much sound from the subs.

 

[10W3dodge96 10+ year member]

i had the same problem check the RCA cables or do you have any RCA cable running from ur output on ur amp