New to Wiring Subs and Amps, Need help!

[Armstrong55]

So i recently got a 600 watt 2 channel amplifier and 2 kicker 10 inch Dual Voice Coil CompS subwoofers at 4 ohms. Now, i'm wondering and i'm new to this but what would be the best way of wiring the two subwoofers up to the amp, while getting the most bass i can but not damaging my amplifier? Any help is great, thanks!

Click to read more...

 

[Boomin_tahoe 5,000+ posts]

Coilover subs...lol

Need the know the exact impedance of the subs and what amp do you have?

 

[Armstrong55]

Coilover subs...lol
Need the know the exact impedance of the subs and what amp do you have?

https://www.walmart.com/ip/Dual-400W-Amp-Black/46270883 that's the amp, nothing fancy. - It shows it's a 400W but it's really 600.

It's rated at 300 watts RMS

Sorry i'm new to this stuff..

 

[tc300 10+ year member]

just google sub wiring and plenty will pop up...

on a side note i would just run one sub on each channel.. brand model..??

 

[Armstrong55]

That's what i Figured I would do, i have another amp i plan on hooking up to run my mid speakers.

 

[Boomin_tahoe 5,000+ posts]

JL Audio » header » Support » Tutorials » Tutorial: Wiring Dual Voice Coil (DVC) Subwoofer Drivers

There ya go. One of the easiest to read/understand on how to wire your subs to your amp, regardless of dvc, svc, and amp impedance. Good luck to ya.

 

[Armstrong55]

JL Audio » header » Support » Tutorials » Tutorial: Wiring Dual Voice Coil (DVC) Subwoofer Drivers
There ya go. One of the easiest to read/understand on how to wire your subs to your amp, regardless of dvc, svc, and amp impedance. Good luck to ya.

Thank you very much. i appreciate it, one more question. If i was to wire the dual 4 ohm subs in series to produce a 4 ohm load at the amp, would i have to worry about damaging / overheating the amp?