New HU help please

  • 4
    Participant count
  • Participant list

Steelemayne
10+ year member

Digital Designs
452
0
Arkansas
Hey, i just purchased a Pioneer DEH-7800MP and I know for a fact it worked when i bought it from my friend. I took out my stock hu and hooked up everything properly, turned my car on and nothing happened. There seems to be no power at all to the hu, so i re-checked everything again and again but still nothing works. Can anyone suggest a reason(s) why its not working?//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 
first check fuse.......if fuse good then use multimeter or test light...........check if your getting power to the hu........if so then check grounds.............good luck

also some hu have fuse in back by harness.........

 
first check fuse.......if fuse good then use multimeter or test light...........check if your getting power to the hu........if so then check grounds.............good luck
also some hu have fuse in back by harness.........
X2^^^^^^^^^^^^^^^^^^^^^^^

 
first check fuse.......if fuse good then use multimeter or test light...........check if your getting power to the hu........if so then check grounds.............good luck
also some hu have fuse in back by harness.........

Checked fuses, all are fine... there doesn't seem to be any power going to the HU at all. I took it to a local shop today and even the guy there was puzzled..

//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 
Check for all the fuses. When I put a HU in my Jimmy, the fuse on the HU was good and the radio fuse was good too. I still had no power to the HU. There was another fuse in the fuse box that was blown, and it affected the radio.

 
Check for all the fuses. When I put a HU in my Jimmy, the fuse on the HU was good and the radio fuse was good too. I still had no power to the HU. There was another fuse in the fuse box that was blown, and it affected the radio.
ok i will check all of the fuses then, thanks man..hopefully we can solve this problem

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I think you're gonna have to get good with fiberglass or something, or find someone with a 3d laser scanner that can 3d print or mold you some...
7
1K
Is this a blue or blue/white wire from the Kenwood? The ACC wire is red and although that should turn on the amp, it is not the prefered wiring...
1
795
The sound deadening is going to be more about preventing vibration from metal surfaces and adding unwanted noise. Does it have the JBL system...
1
781
It's called the K.I.S.S. preciniple ("Keep it simple, stupid!")... Takes the guesswork out of parallel/series wiring.
2
1K
As for which signal to use, I tried all combinations and getting signal from the dash and front & rear doors is the only way the system sounded...
15
2K

About this thread

Steelemayne

10+ year member
Digital Designs
Thread starter
Steelemayne
Joined
Location
Arkansas
Start date
Participants
Who Replied
Replies
6
Views
863
Last reply date
Last reply from
ejschultz
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0

New threads

Top