Should only affect one dimension by 1.5" if I'm thinking correctly... I may be wrong since I've never built or designed a box that shared a port with multiple drivers.
Jesus man. There may or may NOT be cancellation. The problem is because you have two of the same driver reproducing the same signal in the same environment. This is the reason why you use baffles in the first place so that the front wave and back wave don't interfere with one another and cancel out one another. There usually isn't any inherent advantage one way or the other, but the possibility for cancellation in a single chamber enclosure is much greater. Same goes for those who use a single chamber with the port in the middle. Some of the soundwaves can pass into the other chamber and interfere.
yes it was, on an issue that was already argued about :uh:
Oh sweet god in heaven i need one. I would be very thankful. I was reading that ports and encloure sizes need to be EXACT for optimum sound quality. Im a big SQ fan, but i want the power to be there if i want it. Hence the third sub. Is fudging it gonna throw something out of whack? Also here is a picture of the preinstalled subs in the alpine produced enclosure.
Sounds good to me, i just want it to sound good. I dont know alot about tuning ports or how to figure that out. So, what size port do you guys recomend?
i'd say a 12x3 maybe a 12x4 would do you justice with those 3 10's, i was just messin around with those jensens....don't really need that large of a port myself for those 2 10's
