Need some help on wireing up PXA-H701 to W200!!!

[stealitall 10+ year member]

Sup Everyone I need some help here I need some photos or some 1 that can detail it out good on how to wire up Components front and rear and a SUB! To a Pxa-H701 and W200. The 2 Amp's , Components Speaker's , Sub is installed already to a different HU. Just need to figure out what goes were. I got my Pxa-h701 used so no manual. O yea I'm going Digital!! //content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif

Click to read more...

 

[Megalomaniac 5,000+ posts]

front inputs on amps use for tweeter. rear inputs use for mids. or use 1 amp for tweeters and other for mids.

 

[stealitall 10+ year member]

But how can you configure that if you got 2-Way Component system front and rears ??? And the other amp is for Sub!

 

[Megalomaniac 5,000+ posts]

I thought u had 2 amps for comps.

since u plan on running "digital" otherwords ACTIVE. you will need a separate amp for the other pair of components. but u shouldn't need any rear components IMHO. so just run the amp on the front comps and call it a day. make sure amp is set to FULL and none of the filters are on. this way the 701 has control.

 

[stealitall 10+ year member]

No 1 for Comps and 1 for Sub.

 

[alphakenny1 10+ year member]

this is a lil vague question. are you running active? your front stage is 2 way, is that active? your rears, are they components too? if so are they active?

 

[Megalomaniac 5,000+ posts]

this is a lil vague question. are you running active? your front stage is 2 way, is that active? your rears, are they components too? if so are they active?

he has a 701, and he said he's goin digital, so i can only ***ume he's goin active

 

[Megalomaniac 5,000+ posts]

No 1 for Comps and 1 for Sub.

use 1 amp for a 1 set of components. and use your sub amp for subwoofer...simple

 

[ngsm13 5,000+ posts]

Digital means he probably wants to use the optical out on the W200 to the H701.

nG

 

[Megalomaniac 5,000+ posts]

Digital means he probably wants to use the optical out on the W200 to the H701.
nG

nG i got an infraction on the REForum for mentionioning your name //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[stealitall 10+ year member]

Yes I'm going to use the optical out on the head unit. What I'm lost about is what I see Megalomaniac said is that I can only run 2 Comp sets ( FRONT ) off 1 amp is this true? And if I do that what do I do with the Crossovers? Do I run the wires from the Tweeter / Mid and skip the Crossover right to the amp? I can install the head unit easily but I'M just lost on how the PXA-H701 just get wired up!! Here is a diagram that I think shows how to do it?

http://www.mtechaudio.co.th/product/productsub/multichannel/multichannel3/PXA-H701_om.pdf

 

[Megalomaniac 5,000+ posts]

ok heres what you do.

Optical audio into the 701 processor.

now for front outputs on the 701processor run that(rcas) to 2channels of the amp and use that as tweets

now with the rear outputs on 701 run that to the other 2 channels of the amp and use that as mids. all crossing over will be set using the 701controller or any alpine compatible hu.

im assumin you have a 4channel amp. what kinda comps u using?

 

[envengineer 10+ year member]

Run the optical cable and the ai-net cable from the W200 to the pxa-h701, then run one set of RCA's from the "front" output on the PXA-h701 to the amp for your components. Run another set from the subwoofer output to the subwoofer amp. Run the speaker cable from your component amp to the crossovers and then on to the components (this assumes you have a 2 channel component amp if you are doing 4 channel active you need two sets of rcas from the h701 to your component amp).

You can get a PDF of the manual on alpine's website. http://www.alpine-usa.com/images/products/documents/PXA-H701_om.pdf

 

[ngsm13 5,000+ posts]

nG i got an infraction on the REForum for mentionioning your name //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

Lol. I'll just call david... better yet send him an explicit pciture message w/ plenty of nJizm. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

nG

 

[Megalomaniac 5,000+ posts]

Lol. I'll just call david... better yet send him an explicit pciture message w/ plenty of nJizm. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
nG

u saw the thread?

edit: saw ur post with the jiz tank //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif