Besides doing the obvious big 3. I am not quite sure what do electrical wise. I am going to run some of David's (Team PSI's) stage 2 subs, with two Sundown 2500D so they will put out roughly 5k RMS. On top of that I am also going to run a Sundown 100.4. This is all going in a 2005 Honda Accord.
Now should I make two runs of 0 gauge to the trunk? I am not sure I am going to be able to make them through the car as I have always done, is there another way around that is safe? Then run an additional car audio battery back there? I am not so sure about changing the alternator last time I looked there was nothing out there (This was two years ago when I had 2 IA 20.1's and 2 RE Audio 12" XXXs that never made it in there). By all means suggestions are wide open, there is no one in Las Vegas that can do a descent install and I am going to have to do it after breaking my collarbone with a titanium plate in my shoulder so the easier I can do it while still being safe, I am listening.
Now should I make two runs of 0 gauge to the trunk? I am not sure I am going to be able to make them through the car as I have always done, is there another way around that is safe? Then run an additional car audio battery back there? I am not so sure about changing the alternator last time I looked there was nothing out there (This was two years ago when I had 2 IA 20.1's and 2 RE Audio 12" XXXs that never made it in there). By all means suggestions are wide open, there is no one in Las Vegas that can do a descent install and I am going to have to do it after breaking my collarbone with a titanium plate in my shoulder so the easier I can do it while still being safe, I am listening.