Need help!!!!

[daveyboy1977]

Whats the best way to connect this setup?

I have "McHammer Mystic 4-Channel Car Hifi Amplifier 2700W System" amp,

they are on ".hifi-tower.co.uk" website, specs are

■4 x 350W / 2x 700W RMS power (equivalent to 4 x 675 / 2 x 1350W max. output)

■Powerful, adjustable high and low pass filters (6/12dB)

■Frequency range: 10 - 40.000Hz ± 1dB

■Bass range: 50Hz - 250Hz

■Treble range: 60Hz - 2kHz

■Fuse: 2 x 25 A

I have 2 the same subs; Fusion EN-SW120 - 12" Encounter Subwoofer,

They are on "shoppingempire.co.uk" website, specs are

400W ENCOUNTER SUBWOOFER

RMS Power Rating (Watts) 200

Sensitivity (dB) 89

And finally i have a pair of speakers; FLI FI69 6x9" 3 Way Coaxial Car Speakers,

they are on halfords website, specs are

■375 Watts Peak Power

■125 Watts RMS

■Frequency Response: 45Hz- 20 KHz

My question is whats the best way of wiring them all up to that amp, ie series, parallel or each in their own channel, that will give the best sound and last without blowing any of it?

Any suggestions would be great as I'm stumped //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif!!!

Thanks!!

Click to read more...

 

[Gregulate 10+ year member]

Subwoofer Wiring Diagrams

This site is very helpful. Check it out. As for the amp power, you can always just use 1/4 the gain and test.

 

[daveyboy1977]

Thanks for the link and info. I was thinking bout putting the 6X9 speakers in series into one channel and the subs into a channel each. Since the amp says its puts out 350rms one each channel, I am worried that the amp might blow the speakers and subs, which are rated as 125rms and 200rms.

Anyone else any ideas?

 

[Robert 2001 10+ year member]

I doubt the amp will be doing rated power as u have 50a worth of fuse max the amp will probably do is 600 rms or so.

 

[daveyboy1977]

Is there any way of checking how much rms the amp is doing without blowing my subs? And if it is only doing about 600rms, that would be about 150rms per channel, would I be right in thinking that the speakers (125rms) and the subs (200rms) be alright in their own channel?

Thanks for the info Robert.