loudg8
Junior Member
I have a fi ib3 12" that's rated at 550watts at 20hz, so I'm trying to figure if I need like a 600w or a 1000 watt, and does it need to have a frequency response that goes down to 20 hz.
-
1Participant count
-
Participant list
Activity
No one is currently typing a reply...
Similar threads
Oh ok so I might as well just go with a 4th order then
- Started by heredia12
- Enclosure Design & Construction
Here is my thought, theory. Those speakers are 80w rms. Half of that is 40w rms. Add the 40 to the 80 and you get 120w. Get an amp that is 120w...
- Started by sqmoloman
- Amplifiers
It depends on how cheap you wanna go but I've had excellent results with a 12inch power acoustic gothic sub in a small sealed enclosure for budget...
- Started by Sinner13
- Subwoofers 3 4 5
I have 2 Sundown SA10v2 (1000w version) and just replaced my RF R1200 with a T-1500.1bd and OMG! I was considering Ampere Audio, JP23, Sundown...
- Started by Jason WB
- Amplifiers
well, thats kind of an open ended question....., you can do 2500rms@1ohm, or you can do a pair of 1k-1200rms@2ohms. just have to know the amp...
- Started by Ajanis
- Amplifiers
About this thread
New threads
-
-
2017 cherokee latitude help with sub- Started by SamuraiRob
- Replies: 12
-
-
-