xxsaintdawgxx 10+ year member
Member
ok i used the WinISD program and it came up with this for a box for my 4 pioneer W303DVC subs, 3.29ftW, 5.166ftH, and 2.04D with 2 ports 4.02 inches and 1.33 inches deep tuned to 23.13hz now i dunno but that seems awfully low frequncey for these subs i was wondering if these figures were correct ya know if some one could doubble check me
also another question, if i was to but lets say a 2.5inch port in my sealed boxes would it hurt anything, because when you put your finger on the sub and push it down it takes 2 to 3 seconds to come back up i dont know if it was normal with subs, but i thought it might benefet from a small port to solve that problem help would be greatlly apprecated thanks a lot
Keith
also another question, if i was to but lets say a 2.5inch port in my sealed boxes would it hurt anything, because when you put your finger on the sub and push it down it takes 2 to 3 seconds to come back up i dont know if it was normal with subs, but i thought it might benefet from a small port to solve that problem help would be greatlly apprecated thanks a lot
Keith