need an amp for four 8's. im lost.. help appreciated

[fscker 10+ year member]

ok just recently found out that i cant have 2ohms with 4 subwoofers. or can i, shit im confused. i need to power four 8" massive audio subwoofers. theyre 200wRMS. but i heard that two dual 4 subs will have an impendance of 1 ohm. and 4 of them will be .05 ohms. so im stuck.. i need to know a decent amp(s) to give these subs between 200-250 watts a peice.

Click to read more...

 

[Thieroff 10+ year member]

If you wire in series parallel you can have a 2 ohm load, I believe

CT

 

[squeak12 10+ year member]

You can get 2 ohm by wiring each sub to a 8 ohm load via series and them parallel together to yield 2 ohm.

 

[htownplaya456 10+ year member]

with 4 dual 4 ohm subs you can run either 2 ohms or 8 ohms into a final load. check out some of the arc amps

 

[fscker 10+ year member]

got a diagram on how to do this? because the easiest way i know to power them is with 2 kx400.1 amps. but i need a 2ohm impendance

 

[IonSQL 10+ year member]

http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=4&I=42

2 ohm final load

 

[fscker 10+ year member]

image wont show says zone alarm is blocking it but i dont have zone alarm ftl

 

[IonSQL 10+ year member]

I fixed the link...

 

[fscker 10+ year member]

ok thanks. so just cut that in half. run one kx400.1 to two of the subs, wired series/paralell for 2ohm. and do the same with the other amp. correct? or does all 4 subs have to be wired together