My lasted project

thylantyr
10+ year member

CarAudio.com Elite
... nope, not audio //content.invisioncic.com/y282845/emoticons/crying.gif.ec0ebefe590df0251476573bc49e46d8.gif

I refinanced the homestead and got some cash to distribute amongst

a few projects, one being audio, others are woodworking tools/shop stuff,

homestead upgrades, etc.

Money will be tight going forward so this is my last stand.. that said I've

always had the fascination with Texas BBQ smokers... the stomach sometimes

rules over other hobbies, .... mans gotta eat like a king right? ...

This project is consuming me and the evil demons need to be warded off..

http://www.caraudioforum.com/vbb3/showthread.php?t=241005

The custom pit estimate is $3k plus at least $500 shipping. That's alot of iron

to ship.

The biggest hurdle is making the smoker a 3 in 1 tool. Why settle for a one

trick pony when I can have them do mods to make it do more things that

I want. I can't justify dropping that much coin for a 'blind design', I want to

see pics of these mods they do. Good news, I found pics but no pics of

the gas burner mod as most folks don't do that, only crazy Californians like me //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

So.. that is the headache, how to implement gas grilling with V-bars inside

the main chamber to allow gas grilling, allow protection of the burners from

carcass crud and to allow smooth smoking across the horizontal plane.

I have an idea, no big deal, the problem is executing the idea and I await

for the folks at Gator to respond to my crazy thoughts..

Most BBQ folks think the hybrid pit is not ideal, but I want to push the envelope

to see if it can be done well.

I'm hungry, need some BBQ //content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gif

The evil audio demon hates this project as that is money that could be

used to finish my audio battlestation. /arg

 
i dont really understand why you would spend so much money when you can go out and have somone cook a steak for you //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

but if thats what gets your nipples hard, id like some smoked beef to 13090.

 
There is no substitute for good southern/midwest barbeque. Texas (where I'm from) and Kansas undoubtedly have the greatest barbeque ever. Hickory smoked brisket from my old neighbor in texas is the best i've had, and what did he cook it in?? A bathtub.

 
There was only one place in town to get that kind of food... and they sold

the restuarant to the asian folks .. who somehow managed to change the recipe

and it aint the same. So... there is no place to get food like that here

anymore... solution -> DIY food //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

If my place of residence was to be permanent, I think a DIY pit made of

brick would be a neat project, not only to save money but you can have

DIY satisfaction.

Problem is.. I already have many hobbies that drain me, learning a new trade

like metalworking and acquiring the tools to do this isn't something I want to invest

time and money into it.. otherwise it would be cool to clone their design.. I don't know

anything about welding and I'd imagine there is some serious tool investment too.

I'll stick to woodworking and focus on that skill...

:light bulb:

Maybe I can make my own pit out of wood ? //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
man thy, i like wish i was your next door neighbor or something cause you always got some sweet project going on.

I would just come and hang out at your house and oogle over all your crazy stuff, and of course eat some of your BBQ:yumyum:

 
How can you not agree? There's nothing else to do out there.
You sayin theres nothing to do in Kansas? //content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif

I will have to agree... Come on, at home me and a couple friends have stood in the middle of mainstreet on a saturday and talked for 30min and I don't think more than 2 cars went by...

 
Terrorizer 24" pit version 1.0

This is the gas mod idea that I desire. This is just a concept to give

the Gator folks a ballpark idea on what I'm thinking.

Top View

1. Start with a 24" x 36" long pit, 2" offset on the left and right side

and it gives you 32" shelving area.

http://home.pacbell.net/lordpk/pit/24/pit_top-1.jpg

2. Establish some centerlines for the burners and V-bars. My Weber

gas grill uses 1 inch diameter pipe burners on 6" centers. I will follow

the same recipe. The centerlines are 3" in space.

http://home.pacbell.net/lordpk/pit/24/pit_top-2.jpg

3. Install five pipe burners on 6" centers.

http://home.pacbell.net/lordpk/pit/24/pit_top-3.jpg

4. V-bar installation, 11 of them. The Weber V-bars are 2.375" wide and

there is 0.625" space between them. They are installed on center.

http://home.pacbell.net/lordpk/pit/24/pit_top-4.jpg

5. Picture of the burners underneath the V-bar.

http://home.pacbell.net/lordpk/pit/24/pit_top-5.jpg

http://home.pacbell.net/lordpk/pit/24/pit_top-6.jpg

6. Install gas knobs.

http://home.pacbell.net/lordpk/pit/24/pit_top-7.jpg

7. Dimensional data;

http://home.pacbell.net/lordpk/pit/24/pit_top-8.jpg

Cross-section idea

1. 24" inside dimension circle with centerlines

{I don't know the actual size of the pipe}

http://home.pacbell.net/lordpk/pit/24/pit_cross-1.jpg

2. Add 1" diameter pipe burners 'front to back'.

http://home.pacbell.net/lordpk/pit/24/pit_cross-2.jpg

3. Add 1/4" thick x 1" brackets to hold the V-bars.

http://home.pacbell.net/lordpk/pit/24/pit_cross-3.jpg

4. Install Weber V-bars on top of the bracket. Oddly enough,

the Weber V-bar is 22.5" and it fits right in there with a we bit to spare.

{if the pit is not 24" ID, back to the drawing board //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif ]

http://home.pacbell.net/lordpk/pit/24/pit_cross-4.jpg

5. Add the lower cooking grate. I'm taking a big guess that the Gator

pit shelf is 1" above the centerline.

http://home.pacbell.net/lordpk/pit/24/pit_cross-5.jpg

6. Add the upper cooking grate. I'm taking another guess and assuming

it's centered.

http://home.pacbell.net/lordpk/pit/24/pit_cross-6.jpg

7. Add a burner control valve cover plate to the front of the pit, 1/4"

iron plate.

http://home.pacbell.net/lordpk/pit/24/pit_cross-7.jpg

8. Install the gas knob/valve

http://home.pacbell.net/lordpk/pit/24/pit_cross-8.jpg

9. Install the hinged prep table. The first section of the table is

fixed, 4" wide. The hinged part is about 8" wide. The idea is to

fold down the table and not hit the control valves.

http://home.pacbell.net/lordpk/pit/24/pit_cross-9.jpg

10. Add dimensions to the drawing.

http://home.pacbell.net/lordpk/pit/24/pit_cross-10.jpg

Here is how I got these dimensions.

Everything was based off the centerline as a starting point.

Looking at Gator pit pics, I see the lower cooking grate might be

1" above the center line so I placed the lower grate there.

My Weber has about a 2.25" of air gap between the cooking grate

and top of V-bar, so I decided to play it safe and draw a 2.75" air gap

between the lower cooking grate and top of V-bar. If I need to, it

can be moved closer.

My Weber has a 1" air gap between their 1" pipe burner and the

bottom of the V-bar, so I used that dimension.

Comments?

 
My thread on the BBQ pit forum got closed. I scored another star for my

shoulder //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Just like certain audio forums, people are biased in their own ways and aren't

open minded. 99% of the folks don't like a gas mod inside a pit.

So.... I ordered parts to make my own gas assembly and I might have the pit

fabricators just build some brackets to make the gas module install easier,

this comes back to the old saying "you want someone done right, DIY".

When parts come in, lets see if I can blow something up. I'll do a better CAD

drawing for youse to see.....................

If you know anything about propane gas plumbing / design.... raise yer hand.

I've looked at store bought designs and some internet stuff, the concept seems easy.

Propane Tank -> Regulator -> gas pipe manifold -> valve -> orifice -> burner

Orifice hole size is one of the big variables. They sell the orifice with a #70 {very tiny} hole

and it's your job to drill it out bigger for desired flame. Bigger hole, bigger flame. For BBQ,

you don't want a flamethrower design, you want a nice blue flame {no yellow} so I ordered

many orifices to experiment with.

It's amazing that these things work with the orifice just sitting loosely in the burner hole,

not screwed in at all.

I'm thinking of usiing brass 1/4" pipe with tee's for the 5 valve gas manifold...

Comments?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

thylantyr

10+ year member
CarAudio.com Elite
Thread starter
thylantyr
Joined
Location
[Yoda] Belong to us all your base are...
Start date
Participants
Who Replied
Replies
25
Views
1,079
Last reply date
Last reply from
thylantyr
IMG_1882.jpeg

slater

    Oct 4, 2025
  • 0
  • 0
Screenshot_20251004_120904_Photo Translator.jpg

1aespinoza

    Oct 4, 2025
  • 0
  • 0

New threads

Top