My Goat

Guess I might be going to the track tomorrow, I'll keep ya all updated. Problem is we still have no cable, so I'm still running on this crap tune. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 
1st Run- 12.495 @ 110.214, 1.942 60'

2nd Run- 12.108 @ 112.622, 1.793 60'

3rd Run- 12.067 @ 113.904, 1.831 60'

130997910.jpg


130997912.jpg


130997911.jpg


First run was right when I got there, so it was heat soaked and bogged bad. Second run we let it have some time to cool off and stalled it to 1900 not to bog. Third run we did a lot of cool down, ran the heat/used a wire to have the fans on. It should have been an 11 second run, but we were pro treed so that messed me up and I didn't get to stall it so I bogged off the line. Oh well, next time 11's are mine //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif. It was alittle hot out as well and the DA was 2890 //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 
nice car, needs bigger wheels IMO. atleast lookin at it father away it does. clean *** work it looks like. but .....wheres the 6 speed man.....sucks they only came automatic there for a while....or did they ever come 6 speed?

 
I took off the spoiler, I'm going for more of a classy look. I'm debadging the car since I believe it's a Holden and not a Pontiac GTO (Holden make this car anyways). I just plugged the holes from the spoiler for now, I will have them shaved and it repainted when I get my Holden bumper.

The cars come with a 6 speed. Though this is my everyday driver, so I didn't want a M6. I did want 19" wheels, but that would have given me less sidewall and that isn't good for drag racing. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 
Here are a few newer pics. I'm debadging the car. I took off the "GTO 6.0" emblems off the fenders and replaced them with the Monaro side markers. Then I took off the lower bumper insert that said "GTO" on it and replaced with the Monaro rear bumper insert. I guess I'm making a GTO/Monaro hybrid thingy.

All I know is I don't want any GTO or pontiac emblems on the outside of the car. All I got left to do is have some custom grills made, have the pontiac logos on the trunk/front bumper shaved along with the holes from the spoiler. Then have the lower bumper insert painted along with whatever else I shaved off with it. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

131547675.jpg


131547683.jpg


131547682.jpg


131547668.jpg


131547678.jpg


131547685.jpg


131547672.jpg


 
Here is a quick walk around the car and idle/small rev vid. First rev was up to 3500RPM's, second was up to 2500. I didn't want to get killed by my neighbors so I kept the revs down //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif. Maybe I'll make a good reving vid later //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif. As you can tell it idles nicely, still having alittle trouble with start up (**** HP Tuners!). The vid does not do it justice though, enjoy.

http://members.cox.net/05_gto/Start%20&%20Idle%20Vid%202.avi

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Alpine CDA-9815

10+ year member
CarAudio.com Elite
Thread starter
Alpine CDA-9815
Joined
Location
BFE
Start date
Participants
Who Replied
Replies
31
Views
2,258
Last reply date
Last reply from
Alpine CDA-9815
IMG_20260515_202650612_HDR.jpg

sherbanater

    May 15, 2026
  • 0
  • 0
IMG_20260515_202732887_HDR.jpg

sherbanater

    May 15, 2026
  • 0
  • 0

New threads

Top