My friends new sub is rattling

DylanBeatz
10+ year member

Senior VIP Member
313
1
Wisconsin
He bought a 12" MB Quart RWE 304 and we installed it last weekend and right when we hooked it up and it sounded fine. Then the next day we set the gain and then we noticed it was rattling. I wondered if the box wasn't sealed. I pushed on the cone and could hear a noise. I told him to silicone the edges and corners inside the box and then he did that and let it dry without the sub for a while. Then we put the sub back in and then it no longer made the noise when i pushed it in so i knew the airleak was fixed. We turned the sub back on and it still rattles. At very low volumes even. Whats wrong with it? Did the air leak somehow damage the sub?

 
Last edited by a moderator:
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Getting a good voltage reading does not mean good power transfer. You could read 13.8v out of a 24 AWG wire. Recheck your amplifier's ground and...
2
261
That would be a function of the harness, not the HU, I think. Have you looked into a Maestro or iData interface? i would check with crutchfield...
12
572
thanks DB, that definitely helps swallowing a $300 price tag 😂 these would essentially be running midbass for me too
12
605

About this thread

DylanBeatz

10+ year member
Senior VIP Member
Thread starter
DylanBeatz
Joined
Location
Wisconsin
Start date
Participants
Who Replied
Replies
12
Views
1,261
Last reply date
Last reply from
Louisiana_CRX
Screenshot_20240611-211145.png

Blackout67

    Jun 11, 2024
  • 0
  • 0
received_1404248310277849.jpeg

Blackout67

    Jun 10, 2024
  • 0
  • 0

New threads

Top