My first FG attempt... :-/

[audiolife 5,000+ posts]

will save you alot of time dont forget to glass the inside

 

[negativezeroz 5,000+ posts]

will save you alot of time dont forget to glass the inside

Like walls of the enclosure or underneath those layers? //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif now i have to go buy more resin and $0.94 paintbrushes

 

[audiolife 5,000+ posts]

why use paint brushes ? dump it in and roll it around

 

[negativezeroz 5,000+ posts]

the inside walls or underneath the layers of FG already? Cuz I resined the inside walls before I did the front FG

 

[audiolife 5,000+ posts]

the fleece will absorb/adhere it no biggie at all

 

[negativezeroz 5,000+ posts]

the fleece will absorb/adhere it no biggie at all

so still no answer to where to put the resin...and what about carpet? since the "overhang" part?

what I have done....

resined all inside walls and FG'ed the front

just got sander so tomorrow will sand and cut out the cutout... then...prime this week

 

[req 5,000+ posts]

you are supposed to cut the excess fleece off before you start to lay glass

and is it just me, or is that fiberglass SUPER ****ing thick!?

 

[audiolife 5,000+ posts]

if you glassed it good you can take those edges right off with a da if u already glassed the inside (impossible to do since by ur pics the hole isnt cut out lol) then just sand

 

[negativezeroz 5,000+ posts]

you are supposed to cut the excess fleece off before you start to lay glass
and is it just me, or is that fiberglass SUPER ****ing thick!?

//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif 3layers..or so...lol...its strong enuf for the lil hed10





its so little lol its a great dustcollector..

 

[req 5,000+ posts]

it looks like you are using fleece insead of fiberglass. the stuff you are using looks REALLY REALLY THICK, or your resin is REALLY REALLY thick. i dont know man. your supposed to chop the extra fleece off BEFORE you resin it though. i thought taht was obvious...

 

[negativezeroz 5,000+ posts]

it looks like you are using fleece insead of fiberglass. the stuff you are using looks REALLY REALLY THICK, or your resin is REALLY REALLY thick. i dont know man. your supposed to chop the extra fleece off BEFORE you resin it though. i thought taht was obvious...

yes..I know..//content.invisioncic.com/y282845/emoticons/blush.gif.99bc659ee2012b7d826165e26fb5eebe.gif lol I was in a hurry so i will just sand it off tomorrow...thats why its my first "fg attempt" //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[req 5,000+ posts]

lol

it shouldnt be this hard lol

if i was near ya id show you what you need to know

but OK is a bit far from NY lol

 

[negativezeroz 5,000+ posts]

lol
it shouldnt be this hard lol

if i was near ya id show you what you need to know

but OK is a bit far from NY lol

im a loser..lol well my NEXT fg for my new 12" (whenever JBL decides to release them) will be alot better..

wat should i do to correct my early mistakes on the overhang/excess fleece

 

[NhustlaR 10+ year member]

req you can come show me //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif haha just give me some motivation to get my pannels bondo'd primed and painted. if it were for someone else they would have been done months ago and prolly looked a lot better ;-/ haha

and yeah that "resin" looks weird as all hell. and -zero, i would read the sticky about the kick pannels. that will help you a lot. it seems like you are all over the place. just some constructive criticizm

 

[negativezeroz 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/bawling.gif.6287aa5d1d447c8af063fc9466e822ef.gif