my crx project

2000LaDe
10+ year member

CarAudio.com Veteran
well since im on my 2 week leave from iraq ive decided to go ahead and start the install on my crx. as of right now ive only got the box built and the batteries in the spare tire well. a powermaster d3100 and a kinetik hc2000. have a single run of 1/0 memphis power and ground wire as of right now.

didnt get a chance to take pictures of my build from the start but here is what i got so far. its dark out but i figured id try to take a pic.

2 Treo ssi 15s

Sundown 3000d

Sundown 100.4

Treo TSX 5.25" comps

Treo TSX 6.5" coaxials

Pioneer 7800mp

Powermaster D3100

Kinetik HC2000

IMG00200.jpg


IMG00201.jpg


 
i still have to paint the screw caps black. thats why they arent on it. subs arent even screwed down yet. still have to install the 6.5's in the back and run the power and ground from the batteries before i can finish installing the subs.

 
this is my first time using aeroports. little more of a pain in the ass than a simple slot port but it looks ALOT better i think. im not really going for LOUD im more for sounding awesome. box is 6 cube after displacement tuned to roughly 34-35hz.

 
OMG Lade isn't running 18's!!!!!!!!!J/K Nice to here your back in town for a bit.
lol i know right //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif but nah my next van will be 15s as well. just alot of them

 
another bad pic but its of the start of the flush amp rack. i have decided to run the sundown 3000d and the sundown 100.4 in the car. u cant see the 100.4 because i put it under the little compartment in the back of the crx behind the seats. fits perfectly with a little cutting.

IMG00204.jpg


btw this **** POUNDS! i am very impressed considering the 3000d's gain is set to 0. turned it all the way down.

gave pioneerpimp a demo today when i picked up my batteries //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
44%20Black_l.jpg


the new shoes that are going on the rex tomorrow //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif woot 17s

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

TBH, that is too many speakers for just a pair of 10" subs. The Skar 6.5s and tweeters are very efficient and can get super loud on moderate...
6
735
I purchased a set of 1" stand off rings, should still be good from door to cone as well. They won't fit without the spacers, the recoils I...
30
8K
I think the easiest path would be an electronic x-over. You will control all the frequencies from one unit, making for a cleaner and simpler...
1
974
Yes. It's one of those fundamental truths I somehow manage to unlearn every time I figure it out. :rolleyes:
6
1K
I ran 2 10’s aero ported in my 06 mustang years ago. Each box was 1.2 and the subs were diamonds (can’t remember exact model). Best thing to do is...
10
1K

About this thread

2000LaDe

10+ year member
CarAudio.com Veteran
Thread starter
2000LaDe
Joined
Location
Lafayette, IN
Start date
Participants
Who Replied
Replies
36
Views
4,706
Last reply date
Last reply from
bball09124
IMG_5860.jpeg

Brendon Jenness

    May 8, 2024
  • 0
  • 0
Screenshot 2023-12-02 161309.png

Doxquzme

    May 8, 2024
  • 0
  • 0

New threads

Top