My Box RE XXX 15 Box Design

[james33440 10+ year member]

Here are a few pics of the box design that I came up with. Keep in mind that these aren't the cut dimensions but the physical external dimensions. The box is ~5.5 cu ft and ~4.2 cu ft after displacements tuned to 32Hz....

Any thoughts?

Click to read more...

 

[WMStateChamp18 10+ year member]

that looks like it iwll be pretty sweet u building it soon or what?

 

[james33440 10+ year member]

Yeah, I'll probably start this weekend on it. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[WMStateChamp18 10+ year member]

i need a box desinge for a 12 xxx u konw where i could get one?

 

[cjjackson85 5,000+ posts]

i need a box desinge for a 12 xxx u konw where i could get one?

Go to http://www.reaudio.com in their "Tech" section.

 

[tRiGgEr 5,000+ posts]

Go to http://www.reaudio.com in their "Tech" section.

Considering there box dimmensions are wrong you might want to ask someone on this forum.

I just designed a 2ft^3 tuned to 31.69hz with 24 square inches of port area.

Or 2ft^3 tuned to 29hz with 30 square inches of port area...

 

[smullen 10+ year member]

Looks Pretty cool... What software did you use to draw the box in???

Want to do one for me for a 12" XXX

Here are a few pics of the box design that I came up with. Keep in mind that these aren't the cut dimensions but the physical external dimensions. The box is ~5.5 cu ft and ~4.2 cu ft after displacements tuned to 32Hz....

Any thoughts?

 

[audioholic 5,000+ posts]

Looks like either ProEngineer or maybe Solidworks.

 

[g30ffr3y 10+ year member]

nevermind... read the plans wrong...

but

someone might want to check them though... a 4" wide

port probably needs to be longer than that...

 

[james33440 10+ year member]

I used Sketchup 4.0 program. Works great and is so much easier than AutoCad.

yes, I have both. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[saosin 10+ year member]

how big is the port?

 

[drjjg 10+ year member]

Looks good.

 

[SirSyko 10+ year member]

How do you take into account the thickness of the wood?

 

[VOA_NIGHTMARE 10+ year member]

dam my port must be really wrong lol its 4' wide 16' long then turns for another 2' and the hight is like 16, i didnt draw up the plans for mine I found them but it says that tunes it to 35 for mine and its 4.0 after displacment. Anyone want to check my back plans to make sure it is right?

 

[james33440 10+ year member]

How do you take into account the thickness of the wood?

just subtract the thickness from the 2 sides and the front and back piece. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif I am using 3/4" MDF so that's 1.5" I would subtract. Remember though, my front is going to be doubled! //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

I have the actual cut dimensions also it's just when I did this, I put the physical external dimensions to give me an idea of how large it will be in my trunk. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif