MT motor FTL!

[revots 10+ year member]

Dont think its a DIY job you could get hurt doing so.

I'm not gonna try it.

 

[BASSMEKANIK 10+ year member]

Dont think its a DIY job you could get hurt doing so.

puss...

 

[Cahm Rohn 10+ year member]

Naw, get plenty though.

 

[Cahm Rohn 10+ year member]

Plus I didn't want to make it seem like he could go out in the back yard and take care of it.

 

[lilmaniac2 5,000+ posts]

your stupid if u think u can fix a motor with a crow bar //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Cahm Rohn 10+ year member]

Yes, you would have to ship it in. The top plate has shifted and it needs

to be recentered and glued. Recentering a magnetized MT is NOT a fun thing.

They are very strong motors and it probably will have a couple of chips in

the magnets from trying to get the top plate off (it is loose from the

magnet, but the flux keeps it stuck VERY tight to the top plate and to the

pole. It will take a pair of crowbars and 2 people to get it off. Putting

it back on is even less fun as it will pinch your finger off if you get them

between the top plate and magnets when reassembling it.

Thanks,

Scott

Fi Car Audio

 

[revots 10+ year member]

Plus I didn't want to make it seem like he could go out in the back yard and take care of it.

i'm not retarded.

 

[Cahm Rohn 10+ year member]

Who said that you were?

 

[revots 10+ year member]

Yes, you would have to ship it in. The top plate has shifted and it needsto be recentered and glued. Recentering a magnetized MT is NOT a fun thing.

They are very strong motors and it probably will have a couple of chips in

the magnets from trying to get the top plate off (it is loose from the

magnet, but the flux keeps it stuck VERY tight to the top plate and to the

pole. It will take a pair of crowbars and 2 people to get it off. Putting

it back on is even less fun as it will pinch your finger off if you get them

between the top plate and magnets when reassembling it.

Thanks,

Scott

Fi Car Audio

finally an educated answer. I'll call tomorrow.

 

[revots 10+ year member]

Who said that you were?

nobody..it was just funny how you worded it.

 

[lilmaniac2 5,000+ posts]

Yes, you would have to ship it in. The top plate has shifted and it needsto be recentered and glued. Recentering a magnetized MT is NOT a fun thing.

They are very strong motors and it probably will have a couple of chips in

the magnets from trying to get the top plate off (it is loose from the

magnet, but the flux keeps it stuck VERY tight to the top plate and to the

pole. It will take a pair of crowbars and 2 people to get it off. Putting

it back on is even less fun as it will pinch your finger off if you get them

between the top plate and magnets when reassembling it.

Thanks,

Scott

Fi Car Audio

if you could fix it yourself with 2 crowbars why do you think he said you have to ship it in //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Lil_KB 10+ year member]

lilmaniac2 you think you'd want a mojo motor? same exact thing happened to it in shipping...the pole piece is all the way to one side. i have no desire to fix it and no use for it.... make an offer if you'd want it....

 

[Cahm Rohn 10+ year member]

Ok, hope everything works out.

 

[revots 10+ year member]

Ok, hope everything works out.

Me too..I appreciate your help.

 

[lilmaniac2 5,000+ posts]

lilmaniac2 you think you'd want a mojo motor? same exact thing happened to it in shipping...the pole piece is all the way to one side. i have no desire to fix it and no use for it.... make an offer if you'd want it....

sorry ill pass