MT motor FTL!

[revots 10+ year member]

(THIS IS NOT A FLAME THREAD ON ANYONE) I just got a MT 10" in the mail today from midwestcustoms3, I bought it "blown" with a recone kit. well, after i pull out the soft parts this is what i find.

Coil is fine.

Pole piece looks off center and seems to be causing the coil to stick.

How can i get it fixed, and how much will it cost?

Click to read more...

 

[gl0ck 10+ year member]

what meter is that i want it

 

[Cahm Rohn 10+ year member]

RE told me they couldn't just (fix) the sub that they would charge for the recone and at least another $200 if the magnets were broken in the process.

 

[bdawson72 5,000+ posts]

RE should help.....ask teampsi for more info

 

[bibby 5,000+ posts]

drop scott(fi) an email.

 

[revots 10+ year member]

****!!! so a misaligned pole piece constitutes a broken magnet??

It's a fluke 83III

 

[revots 10+ year member]

drop scott(fi) an email.

will do, i'll try both him and team psi

 

[lilmaniac2 5,000+ posts]

not sure how u break a magnet unless its broken into 2 pieces or demagnetize it

motor needs baked.... you could sell it to me for 15 bucks + shipping tho

 

[revots 10+ year member]

not sure how u break a magnet unless its broken into 2 pieces or demagnetize it
motor needs baked.... you could sell it to me for 15 bucks + shipping tho

that seems kind of expensive for a 55lb paper weight.

 

[Cahm Rohn 10+ year member]

The process was described to me that it took 2 people with crowbars, and some elbow grease.

 

[revots 10+ year member]

The process was described to me that it took 2 people with crowbars, and some elbow grease.

i could do that, just no way of knowing when it's perfectly center.

 

[lilmaniac2 5,000+ posts]

that seems kind of expensive for a 55lb paper weight.

shipping shoulndt be much... id pay 30 bucks for it

 

[Cahm Rohn 10+ year member]

Dont think its a DIY job you could get hurt doing so.

 

[bdawson72 5,000+ posts]

??

 

[revots 10+ year member]

shipping shoulndt be much... id pay 30 bucks for it

Thanks for the interest but i think i'll try to get it fixed.