More Voice/trebel out of my system?

[jbgarner12 10+ year member]

I have 2-10" RF p3's dual 4ohm powered by a Kicker 500.2 bridged parallel(ported box)..

Alpine type S components 5x7 front and rear, tweets in the doors..4 channel Kenwood 4x50...Kenwood 4028 HU..I love the bass I'm getting but kinda need some more voice/trebel out of the system..I'm a noob so I don't have a lot of experiance with this stuff...Any help would be much appreciated..thanks....

hpr =100

hpf=150

lp=80

//content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

Click to read more...

 

[helotaxi 5,000+ posts]

Basically you need to step up to better speakers and run more power to them. That is pretty much the only way to get what you want. Go with a good set of components (you will probably have to have some custom work done to get them to fit since you factory speakers are 4x6) and get a solid 2 channel amp of about 100+ watts per side to power them. You can either continue to run your rear spaekers off the head-unit or ditch them altogether. Another option for power would be to bridge each pair of channels of the amp you have to one side of the front components. Ch1/2 to one side and ch 3/4 to the other.

 

[bamaboy 5,000+ posts]

you think you have a voice problem...hmfp

change the eq on the HU(if it has one)

amp the door speakers better

better door speakers

wear tweeter headphones with 40rms per side

 

[jbgarner12 10+ year member]

lol...

 

[jbgarner12 10+ year member]

I think I will upgrade my fronts to type -R's and feed them more rms(leave the rears typr-s with deck power)...Guess I'll probably bridge my Kenwood KAC-8402..180 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)..Too much!! power for Type r's 5x7's...

 

[SHOtime 10+ year member]

Am I reading that your high pass filter is set at 150 Hz? Seems a tad high to me. Try setting your treble controls higher and your bass lower. Sometimes you gotta play around with it for a bit.

 

[spudracer326 10+ year member]

you wont gain much by getting the type r's. Talk to 6spd on here and get some rainbow slcs, they arent much more....

 

[jbgarner12 10+ year member]

Does MA make good components?....I only need one set of 5x7's I don't wanna break the bank....