Mids bottoming out on one side, not sure what to try?

[keep_hope_alive Premium Member]

here is a test procedure: X indicates what has failed

 

[keep_hope_alive Premium Member]

the popping can occur if the RCA is "open-ended". i once got what sounded like clipping when i had male RCA ends loose on one side of Y-adapters (during some tests). it wasn't an RCA failure but just that the ends were not properly loaded. it sounded a lot like clipping.

 

[Chaotic_Thought 10+ year member]

replace the RCA's.

The RCA's are 3 months old from Knukonceptz. I will try another set however to see if that remedies the problem.

 

[Chaotic_Thought 10+ year member]

here is a test procedure: X indicates what has failed

I assume the arcs by the speaker indicate the speaker popping?

 

[keep_hope_alive Premium Member]

No, the arcs identify the properly working speaker. I suppose I need a symbol key. I developed it for troubleshooting a non-working speaker.