MB QUART Reference RAA2400
» 2-channel car amplifier
» 200 watts RMS x 2 at 4 ohms (400 watts x 2 at 2 ohms)
» 800 watts RMS x 1 in bridged mode (4-ohm stable)
» variable front and rear high- and low-pass filters (50-5000 Hz at 12dB/octave)
» CEA-2006 compliant
» multiplier x10 switch converts filters to variable from 500 to 5,000 Hz
» LED clipping indicators
» preamp-level inputs and outputs
» front end defeat bypasses gain and crossover controls
» fuse rating: 30A x 3
» 4-gauge power and ground leads with 100A ANL fuse and holder recommended — wiring and hardware not included with amplifier
» 11-7/16"W x 2-3/8"H x 17"D
It is in excellent functional and cosmetic condition. I bought it on ebay NEW (not refurb or B-stock) and I have used it for the past 5-6 months to power my midbass drivers at 4 ohms. It has never been driven hard and the gains have stayed set at minimum. It will come with everything from the initial purchase (original box, manual, hex wrench, screws, fuse, panel covers, etc.) I'll have some pictures up later today...
SOLD or possible trades for 2 ch (25-100 watts) +/- cash:
DLS A2, DLS A1, Linear Power, ESX, Lunar, Arc Audio 2050, Older US Amps, Older Soundstream, Phoenix Gold MS/MQ, Adcom, Precision Power M/AM/PROMOS. But they must have a foot print less then 11"x9"
» 2-channel car amplifier
» 200 watts RMS x 2 at 4 ohms (400 watts x 2 at 2 ohms)
» 800 watts RMS x 1 in bridged mode (4-ohm stable)
» variable front and rear high- and low-pass filters (50-5000 Hz at 12dB/octave)
» CEA-2006 compliant
» multiplier x10 switch converts filters to variable from 500 to 5,000 Hz
» LED clipping indicators
» preamp-level inputs and outputs
» front end defeat bypasses gain and crossover controls
» fuse rating: 30A x 3
» 4-gauge power and ground leads with 100A ANL fuse and holder recommended — wiring and hardware not included with amplifier
» 11-7/16"W x 2-3/8"H x 17"D
It is in excellent functional and cosmetic condition. I bought it on ebay NEW (not refurb or B-stock) and I have used it for the past 5-6 months to power my midbass drivers at 4 ohms. It has never been driven hard and the gains have stayed set at minimum. It will come with everything from the initial purchase (original box, manual, hex wrench, screws, fuse, panel covers, etc.) I'll have some pictures up later today...
SOLD or possible trades for 2 ch (25-100 watts) +/- cash:
DLS A2, DLS A1, Linear Power, ESX, Lunar, Arc Audio 2050, Older US Amps, Older Soundstream, Phoenix Gold MS/MQ, Adcom, Precision Power M/AM/PROMOS. But they must have a foot print less then 11"x9"
