mach 5 >US??

[jeremiah 10+ year member]

how much will the SPL sub be

 

[jeremiah 10+ year member]

at like 55lb for a 12" shipping will be like $88

 

[tez4life Premium Member]

I wasnt going to say anything but,.....

Outstanding customer service, quality product, at a reasonable price? Tell me where else your going to find a 18 that performs this well for under $150? Even the 15s are a bargin. And everyone that has them has not had anything negative to say about their preformance, period.

To me, there one of the best bang for the buck deals outthere. If they were any cheaper they would be giving them away. I think the price is fine, and even if it went up a few dollars, your still getting a bargin.

JMO

 

[jeremiah 10+ year member]

I wasnt going to say anything but,.....
Outstanding customer service, quality product, at a reasonable price? Tell me where else your going to find a 18 that performs this well for under $150? Even the 15s are a bargin. And everyone that has them has not had anything negative to say about their preformance, period.

To me, there one of the best bang for the buck deals outthere. If they were any cheaper they would be giving them away. I think the price is fine, and even if it went up a few dollars, your still getting a bargin.

JMO

X2^^

 

[Puggsley456 10+ year member]

I cant wait to see the specs and price on the high excursion 18's you got coming out.

Its a behemoth. And will be truely impressive once the final modifications are made. Its going to claustrophobic to say the least.

And also in regards to the pricing......Dont forget guys, this is mach5's first foray into this kind of parntership. So not knowing in advance the hurdles and fees involved was an inevitable learning curve.

And Denim....its Winnipeg.....LOL //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[jeremiah 10+ year member]

Its a behemoth. And will be truely impressive once the final modifications are made. Its going to claustrophobic to say the least.
And also in regards to the pricing......Dont forget guys, this is mach5's first foray into this kind of parntership. So not knowing in advance the hurdles and fees involved was an inevitable learning curve.

And Denim....its Winnqpeg.....LOL //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

what?

j/k:laugh:

 

[jeremiah 10+ year member]

will the SPL sub com in a 15" ?

 

[jeremiah 10+ year member]

"';:]}[{+-&gt)))>

 

[Puggsley456 10+ year member]

will the SPL sub com in a 15" ?

Patience is a virtue. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Let the kinks of the 12" get worked out. And see what the market calls for. I would say its a definite possibility, but time will tell.

 

[denim 5,000+ posts]

Patience is a virtue. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
Let the kinks of the 12" get worked out. And see what the market calls for. I would say its a definite possibility, but time will tell.

x2,

 

and sorry for the misspelling. //content.invisioncic.com/y282845/emoticons/blackeye.gif.66a1670f5aaf7f406e783a63e3387dc5.gif

 

[Kev4029]

I just ordered a maw-15 direct from mach5 for 106.98 after the credit card fees. I saved myself 2 cents ordering direct from them to Colorado. NICE!

 

[Hintzyboy 5,000+ posts]

I shouldn't be adding any more than I already have, but purchasing from SSA would be more advantageous especially if you purchase multiple units. Depending on the total dollar value of the product, you may get charged additional duties, taxes and brokerage fees.
All that adds up to be rather painful.

Hence, the reason to get a shipment to SSA - so folks don't incur said costs.

Best,

Mark

I don't think we have to pay duty fees here if the shipment is from Canada. NAFTA

 

[mrogowski 5,000+ posts]

I wish. NAFTA means nothing if the product is produced offshore. This goes for both sides of the border.

 

[///M5 10+ year member]

NAFTA doesn't mean much either way, I realize this regularly when I try and bring $700k worth of measurement gear accross the border, it really isn't fun and even though I don't ever leave it there my company has still had to pay import tariffs.

I really can't believe that you guys are having a hard time with this. Mark & Aaron could easily sell the drivers for twice the amount they are and upcharge on the shipping. These are an incredible deal and an outstanding value with absurdly cheap shipping, I know for a fact neither one of them are really gaining anything financially from this and yet in this thread I get the idea that people are complaining about the price. You all need to grow up and realize that in business this isn't how it works and both of these guys and SSA are doing you a favor.

To put things in perspective for most companies a profit margin of 40% is barely acceptable, in their cases it isn't even a percentage of that. If I were you all, I'd hurry up and buy before this dream disappears.

 

[///M5 10+ year member]

I wanted to put 4 mj-18s in my car... but between the time it took to get them to SSA and the fact that now that I work in a car audio shop, I get a good discount... I guess I wont need em now. Im goin with 4 memphis 15s.
Any idea what 4 mj-18s would do to a car?

Way more than those Memphis 15's...