lowering my F-150

[audiobahn12989 10+ year member]

well tomorrow im goin to flip the leaf springs..how low will this put it...im just goin to do it like this and then do some cheap lowering kit for the front end until i get the money to bag it

Click to read more...

 

[eg9 10+ year member]

if I'm not mistaken you will need the flipkit for the rear and drop spindles for the front

 

[eg9 10+ year member]

not cheap but I recommend Belltech kits

 

[audiobahn12989 10+ year member]

appreciate....gah u sure know ur cars lol

 

[audiobahn12989 10+ year member]

can i get the flip kit at autozone? if so how much would it be

 

[eg9 10+ year member]

not sure whether they sell belltech but they might carry a kit just not sure. call around and check your local shops

 

[audiobahn12989 10+ year member]

ok im not goin to get beltech just gettin somethin cheap for now....thanks for the help

 

[eg9 10+ year member]

ygpm

 

[xtremekustomz 10+ year member]

if you want to go cheap go to http://www.truckn.com It will ride like crap though unless you use lowering spindles and that is going to cost you either way. You can get a drop spring that will go 3" but the cheap ones are awful.

 

[trevor87 5,000+ posts]

i got a 4/6 djm kit on my truck, and i had to get a 6" flip kit for the back and 4" lower control arms for the front, I had to c notch the frame in the back and cut off my ehaxust before the axle, i also had to have drop shocks all the way around. The kit was 450 the shocks 130 and the labor 150.

 

[Chevyaudio 5,000+ posts]

Using cheap suspension parts probably isnt the best thing...

My suspension is Belltech.