L7 true power handling

[talon2nr7588 10+ year member]

do you guys think that the '05 models can handle 1800 watts rms? http://www.cbrstereo.com/index.asp?PageAction=VIEWPROD&ProdID=1005

 

[Towncar 10+ year member]

do you guys think that the '05 models can handle 1800 watts rms? http://www.cbrstereo.com/index.asp?PageAction=VIEWPROD&ProdID=1005

No //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif I wouoldnt feed the old 15s more than 1400.

Ps why are you asking the same question on 2 different threads?

 

[vetkilr 10+ year member]

Those amps in real life wont put out 1800watts.

X2 on the 2 thread thing...........lol

 

[talon2nr7588 10+ year member]

Those amps in real life wont put out 1800watts.

X2 on the 2 thread thing...........lol

what about the BXI2200's ?

the other thread is for people who already own an L7 to post what wattage they are giving it

 

[talon2nr7588 10+ year member]

even if they don't put out the 2200 watts they should put out at least 1600-1800 watts

 

[vetkilr 10+ year member]

Are you goin 1 amp or 2?????

 

[Towncar 10+ year member]

even if they don't put out the 2200 watts they should put out at least 1600-1800 watts

Watch the gains. Set it for 12-1400, and you should be set

 

[talon2nr7588 10+ year member]

i'm going for two amps one for each L7. the L7s can handle more than the recommended 1000 watts rms so i was thinking about getting the 2ohm versions, then wiring them down to 1 ohm and hooking up a hifonics brutus bxi2200 to each of them

 

[evilkokonut 10+ year member]

i'm assuming the power handling for the CVX is about the same right? I'm giving my 12" CVX 1200w right now

 

[talon2nr7588 10+ year member]

they are the same, they're suppose to be the same subs but the CVX's are round not squeare like the L7s. kicker put the technology of the square L7 in a round sub

 

[Hybrid90accord 10+ year member]

L7s can handle alot of power IMO, my brother had a 1100a2 rockford pushing 1 12" L7 series 1, the old black one's dual 2 ohm in a custom cut virtual technologies box and that shit hit so **** hard for 2 year no problem before he went with a pair of 12" RF power dvc. So im sure a 15" can handle 1000rms easy

 

[DFW40 10+ year member]

I had the older L7 "silver cone" and had it hooked up to a JL 500/1 in a 3.0 cube sealed box and had no problem getting the sub to full excursion on most songs. I could see sending one 1000 watts but anything over that is probably a waste unless you are doing burps @55hz in a spl contest.

 

[talon2nr7588 10+ year member]

yup they definately are good subs but they can handle more than 1000 rms.

 

[vetkilr 10+ year member]

yup they definately are good subs but they can handle more than 1000 rms.

Thats why I got another MD2D for mine..............//content.invisioncic.com/y282845/emoticons/up2something.gif.dd110ecf3ae4b76050d87598f2f8de7c.gif

 

[newusername 10+ year member]

With a highly clipped signal any sub can be blown with a quickness.//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif The fact of the matter is the new models can take some serious abuse, and anybody thats blowing them quickly doesnt know how to set gains.

clipped signals do not kill speakers.