kx1200.1 amp tuning

[keifersracing 10+ year member]

well on them you have coil 1 and coil 2 i went from coil -1 to -2 then to sub 2 coil-1 to coil-2 then to the amp

 

[dkguitarist 5,000+ posts]

cuz dvc 2s can either be wired to 1 or 4 ohms i believe. check the vc wiring sticky for a 1ohm load to make sure.

 

[keifersracing 10+ year member]

i could not find any thing for the kicker l7 just rockford

 

[dkguitarist 5,000+ posts]

i could not find any thing for the kicker l7 just rockford

it's a generalization for all vc configurations. not specific subs.

 

[keifersracing 10+ year member]

ya but do you go from coil 1 or coil 2 first

 

[dkguitarist 5,000+ posts]

cuz wiring each sub from ++ and -- would give you a 2ohm load for each sub. then wire both to the amp for a final load of 1ohm, and you should be good.

*edit* doesn't matter. wire each sub positive to positive and negative to negative.

 

[keifersracing 10+ year member]

that is what i did

 

[dkguitarist 5,000+ posts]

idk much else of what to suggest. i'm sure someone else can give some advice.

 

[keifersracing 10+ year member]

well thanks for your time and help

 

[Polecat 5,000+ posts]

there are wiring diagrams on our site, http://www.kicker.com

 

[keifersracing 10+ year member]

that is how i got it but they do not sound right and people say i have every thing set ok but i can smell some thing burn

 

[keifersracing 10+ year member]

there are wiring diagrams on our site, http://www.kicker.com

do you know this person Kris Bellinghausen from kicker. he e-mail me back to night and gave me some very good info and whats to do.