Kicker ZX750.1 vs PG Xenon 600.1

what are solobaric sd12's? l5 or l7? but either way neither, l5's are rated at 600wrms and the l7's are 750wrms i believe for 12"s. true the kicker is underrated, i've seen plenty of birthsheets saying 900-950wrms but the pg is actually rated, maybe put out just a little more like 700wrms at most.

 
the pg is actually rated, maybe put out just a little more like 700wrms at most.
Wrong!!! All 600.1s will atleast do 800 watts atleast. The old birthsheets may say otherwise, but they were messed up. If you have any questions reguarding that call pg. As for which amp is better well, different people are going to have their opinions, but build quality wise the pg is superior. Its more comparable to the kicker sx series, minus the onboard processing. Tripple darlington output stages, ect... Both amps are good though.

 
Yeah, he's got the old school round ones. Built in 1998 I believe. They are rated at 600 watts max. Any suggestions?

 
Wrong!!! All 600.1s will atleast do 800 watts atleast. The old birthsheets may say otherwise, but they were messed up. If you have any questions reguarding that call pg. As for which amp is better well, different people are going to have their opinions, but build quality wise the pg is superior. Its more comparable to the kicker sx series, minus the onboard processing. Tripple darlington output stages, ect... Both amps are good though.
actually i have spoken with pg about this several times and they said that's not true. from their techs they say everyone was going around saying the first batch of xenons were bad and had to be sent back for repairs and when they were repaired they were made to put out more power then before. the techs i spoke with said that while some maybe most will hang around the 700wrms range at 14.4v. just what they've told me.

abd korndawg, you need to post the rms and vc config. of the subs to get any help. max ratings are useless and don't mean anything.

 
I kind of Vote Xenon.

reasons:

More wiring options. 4-1 ohm stable,

Overbuilt internals

Underrated, more around 700-800 ish RMS

I like the Kicker though, But as you can see, I'm a PG fanboi now //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

If all else equal, I'd say PG for wiring flexibility reasons. (BTW, they make greatest power at 2 0hm loads for Mono, 4 ohm load for multi)

~Levi

 
actually i have spoken with pg about this several times and they said that's not true. from their techs they say everyone was going around saying the first batch of xenons were bad and had to be sent back for repairs and when they were repaired they were made to put out more power then before. the techs i spoke with said that while some maybe most will hang around the 700wrms range at 14.4v. just what they've told me.
abd korndawg, you need to post the rms and vc config. of the subs to get any help. max ratings are useless and don't mean anything.
I dont know who youve been talking to then. Here is a quote from errin @pg himself.

" X600.1 = 800+ watts RMS @ 4 ohms. "

 
My zx750.1 birthsheet reads 932, so I vote kicker for more power.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif Although the Xenon is more flexible.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

korndawg

10+ year member
Member
Thread starter
korndawg
Joined
Location
IA
Start date
Participants
Who Replied
Replies
20
Views
2,368
Last reply date
Last reply from
Towncar
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top