Kicker ZX350.4 amp problem

  • 1
    Participant count
  • Participant list

500000watts
10+ year member

Senior VIP Member
459
0
MI
i have used this amp to run only my 2 front speakers and it has done a great job. i had a bad connection on my right door speaker so everyonce in a while it would go off and come back on our flicker. the other day i fixed the connection and installed some back speakers as long as it was all opened up. the problem is i used the head unit to F/B L/R and located which side the speakers went in order, but when i was done i used the fader to move it to the front so i had %75 front and %25 in the back. when i do that the volume of both front and back stay equal, but when i fade it all the way back the front speakers go dimmer.. when they are in the back and faded in the front my right speaker is noticeably louder then my left. i also let it play for a while to find out that my right speaker still flickers on and off after i fixed it to a solid connection.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Yep, that will mark the third iteration of teh X series. i figured that was in the loop as they have been running out of stock on the last...
11
607
Is this a blue or blue/white wire from the Kenwood? The ACC wire is red and although that should turn on the amp, it is not the prefered wiring...
1
753
low level when using RCAs so that knob should be pushed out. The crossover turn it all the way right and use the one on the head unit and set it...
5
1K

About this thread

500000watts

10+ year member
Senior VIP Member
Thread starter
500000watts
Joined
Location
MI
Start date
Participants
Who Replied
Replies
1
Views
540
Last reply date
Last reply from
500000watts
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top